Product | 12 x GPIO with selectable pullup resistors | Price | |
---|---|---|---|
Adafruit ATtiny816 Breakout with seesaw - STEMMA QT / Qwiic | pins 0, 1, 7, 11, 16 | 0-5, 6, 8, 11, 14, 15, 16 | $4.95 |
Adafruit ATtiny816 Breakout with seesaw - STEMMA QT / Qwiic | pins 0, 1, 7, 11, 16 | 0-5, 6, 8, 11, 14, 15, 16 | $4.95 |
Product | Price | |
---|---|---|
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic | pins 0, 1, 9, 12, 13 | $4.95 |
Product | "On" resistance | Price | temperature |
---|---|---|---|
SparkFun Analog/Digital MUX Breakout - CD74HC4067 - BOB-09056 - SparkFun Electronics | 70 Ohms @ 4.5V | - | -55C to 125C |
Product | 10-pin IDC Socket Rainbow Breakout Cable (0 | Price |
---|---|---|
10-pin IDC Socket Rainbow Breakout Cable | 07) | $3.95 |
10-pin IDC Socket Rainbow Breakout Cable | 07) | $3.95 |
Product | 12 x GPIO with selectable pullup resistors | Price |
---|---|---|
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic | 0-5, 6, 8, 11, 14, 15, 16 | $4.95 |
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic | 0-5, 6, 8, 11, 14, 15, 16 | $4.95 |
Product | 3-Axis with Selectable Measurement Range | High Resolution | Price | Wide Voltage Range |
---|---|---|---|---|
SparkFun Triple Axis Accelerometer Breakout - ADXL362 - SEN-11446 - SparkFun Electronics | ±2, ±4, or ±8g | 1 mg/LSB | - | 3.5 V |
Product | 3.3V VCC and I/O Current Consumption | Cold | Heading Accuracy | Hot | Max Altitude | Max G | Max Velocity | Price | Time Pulse Accuracy | Velocity Accuracy | current consumption |
---|---|---|---|---|---|---|---|---|---|---|---|
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic) - GPS-15733 - SparkFun Electronics | ~31mA Tracking GPS+GLONASS | 24 s | 0.005236 rad | 2 s | 8E+04 m | ≤4 | 500 m/s | - | 30ns | 0.05 m/s | ~31mA Tracking GPS+GLONASS |
SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic) - GPS-17285 - SparkFun Electronics | ~31mA Tracking GPS+GLONASS | 24 s | 0.005236 rad | 2 s | 8E+04 m | ≤4 | 500 m/s | - | 30ns | 0.05 m/s | ~31mA Tracking GPS+GLONASS |
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic) - GPS-15712 - SparkFun Electronics | ~31mA Tracking GPS+GLONASS | 24 s | 0.005236 rad | 2 s | 8E+04 m | ≤4 | 500 m/s | - | 30ns | 0.05 m/s | ~31mA Tracking GPS+GLONASS |
Product | 3.3V VCC and I/O Current Consumption | Cold | Heading Accuracy | Hot | Max Altitude | Max G | Max Velocity | Price | Time Pulse Accuracy | Velocity Accuracy | current consumption | dimension |
---|---|---|---|---|---|---|---|---|---|---|---|---|
SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic) - GPS-18037 - SparkFun Electronics | ~6mA to ~25mA (varies with constellations and tracking state) | 24 s | 0.005236 rad | 1 s | 8E+04 m | ≤4 | 500 m/s | - | 30ns | 0.05 m/s | ~6mA to ~25mA (varies with constellations and tracking state) | 1.74" x 1.20" |
Product | 3.3V plated through-hole (PTH) pins for | LED indicators for | Price |
---|---|---|---|
SparkFun LTE GNSS Breakout - SARA-R5 - GPS-18031 - SparkFun Electronics | SARA on Network indicator UART1 GNSS timing pulse (1PPS) I2C bus | Power (VIN and 3.3V) SARA-R5 on Network indicator GNSS timing pulse (1PPS) | - |
Product | 4x single ended clock outputs can generate frequencies from 1MHz-200MHz in the following signal output | 8x differential clock outputs can generate frequencies from 1MHz-350MHz in the following differential outputs | Price |
---|---|---|---|
SparkFun Clock Generator Breakout - 5P49V60 (Qwiic) - BOB-15734 - SparkFun Electronics | LVCMOS | LVDS LVPECL HCSL | - |
Product | 6 near-IR channels | Price |
---|---|---|
SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic) - SEN-14351 - SparkFun Electronics | 610nm, 680nm, 730nm, 760nm, 810nm and 860nm, each with 20nm FWHM | - |
Product | 6 visible channels | Price |
---|---|---|
SparkFun Spectral Sensor Breakout - AS7262 Visible (Qwiic) - SEN-14347 - SparkFun Electronics | 450nm, 500nm, 550nm, 570nm, 600nm and 650nm, each with 40nm FWHM | - |
Product | 7-bit unshifted I2C Address | Field of View | Light Source | Max Read Rate | Operating Voltage | Power Consumption | Price | Resolution | measurement range |
---|---|---|---|---|---|---|---|---|---|
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic) - SEN-14722 - SparkFun Electronics | 0x29 | 15° - 27° | Class 1 940nm VCSEL | 50 Hz | 2.6V-3.5V | 20 mW @10Hz | - | +/-1mm | ~40mm to 4,000mm |
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic) - SEN-14722 - SparkFun Electronics | 0x29 | 15° - 27° | Class 1 940nm VCSEL | 50 Hz | 2.6V-3.5V | 20 mW @10Hz | - | +/-1mm | ~40mm to 4,000mm |
Product | AES-128 | Active Current Draw for ATECCA | Configurable I2C Address (7-bit) | Price | Sleep Current for ATECCA |
---|---|---|---|---|---|
SparkFun Cryptographic Co-Processor Breakout - ATECC608A (Qwiic) - DEV-18077 - SparkFun Electronics | Encrypt/Decrypt, Galois Field Multiply for GCM | 16 mA | 0x60 (Default) | - | <150 nA |
Product | Absolute RH accuracy | Price | Repeatability RH | Temp. accuracy | Weight | dimension | measurement range |
---|---|---|---|---|---|---|---|
Humidity and Temperature Sensor - SHT15 Breakout - SHT15 | +/- 2% RH (10...90% RH) | $41.95 | +/- 0.1% RH | +/- 0.3°C @ 25°C | 1.3g | 20mm / 0.8" x 20mm / 0.8" | 0-100% RH |
Humidity and Temperature Sensor - SHT15 Breakout - SHT15 | +/- 2% RH (10...90% RH) | $41.95 | +/- 0.1% RH | +/- 0.3°C @ 25°C | 1.3g | 20mm / 0.8" x 20mm / 0.8" | 0-100% RH |
Product | Accelerometer Accuracy | Dynamic Error | Dynamic Rotation Error | Gravity Angle Error | Gyroscope Accuracy | Heading Drift | I2C (Default) | Linear Acceleration Accuracy | Magnetometer Accuracy | Operating Voltage | Price | SPI | Static Error | Static Rotation Error | uart |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SparkFun VR IMU Breakout - BNO080 (Qwiic) - SEN-14686 - SparkFun Electronics | 0.3m/s2 | 0.06109 rad | 0.07854 rad | 0.02618 rad | 3.1° / sec | 0.5° / min | Up to 400kHz | 0.35m/s2 | 1.4µT | 1.65V - 3.6V | - | Up to 3MHz | 0.02618 rad | 0.05236 rad | 3Mbps |
Product | Accuracy | Air flow speed | Average current draw | Price | Resolution | dimension | i2c address | input voltage |
---|---|---|---|---|---|---|---|---|
SparkFun Air Velocity Sensor Breakout - FS3000-1005 (Qwiic) - SEN-18377 - SparkFun Electronics | 5% of full scale flow range | 0 - 7.23 m/sec (0 - 16.17mph) | 10mA | - | 12-bit | 1.00in. x 1.00in. | 0x28 | 2.7-3.3V |
Product | Accuracy | Cold starts | Price | Tracking |
---|---|---|---|---|
Adafruit FONA 3G Cellular Breakout - American version - FREE Ting Sim Card w/ Purchase! | approx 2.5 meters | 100s (typ.) | $79.95 | -157 dBm |
Adafruit FONA 3G Cellular Breakout - American version - Without Free Ting Sim Card | approx 2.5 meters | 100s (typ.) | $79.95 | -157 dBm |
Adafruit FONA 3G Cellular Breakout - American version - FREE Ting Sim Card w/ Purchase! | approx 2.5 meters | 100s (typ.) | $79.95 | -157 dBm |
Product | Accuracy | Operating Current | Price | Voltage - Supply | Weight | temperature |
---|---|---|---|---|---|---|
MCP9808 High Accuracy I2C Temperature Sensor Breakout Board | 0.25ºC typical | 200 μA (typical) | $4.95 | 2.7V ~ 5.5V | 0.9g | -40ºC ~ 125ºC |
MCP9808 High Accuracy I2C Temperature Sensor Breakout Board | 0.25ºC typical | 200 μA (typical) | $4.95 | 2.7V ~ 5.5V | 0.9g | -40ºC ~ 125ºC |
Product | Accuracy Rate | Human Detection Distance | Operating Voltage(Startup) | Operating Voltage(Timekeeping) | Price | current consumption | i2c address | temperature |
---|---|---|---|---|---|---|---|---|
SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic) - SEN-14607 - SparkFun Electronics | ±2.5°C (±4.5°F) | 7m or less (22.966ft) | 1.6V - 3.6V | 1.5V - 3.6V | - | 4.5 mA | 0x69 (open jumper, default) or 0x68 (closed jumper) | 0°C to 80°C (32°F to 176°F) |
Product | Active Current Draw for ATECCA | Configurable I2C Address (7-bit) | Price | Sleep Current for ATECCA |
---|---|---|---|---|
SparkFun Cryptographic Co-Processor Breakout - ATECC508A (Qwiic) - DEV-15573 - SparkFun Electronics | 16 mA | 0x60 (Default) | - | <150 nA |
Product | Altitude | Price | pressure | temperature |
---|---|---|---|---|
SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2 - SEN-11084 - SparkFun Electronics | 20-bit measurement (meters) | - | 20-bit measurement (Pascals) | 12-bit measurement (degrees Celsius) |
Product | Altitude Range | Humidity Range | Operation Voltage | Price | Temp Range | pressure |
---|---|---|---|---|---|---|
SparkFun Atmospheric Sensor Breakout - BME280 - SEN-13676 - SparkFun Electronics | 0 to 30,000 ft (9.2 km), relative accuracy of 3.3 ft (1 m) at sea level, 6.6 (2 m) at 30,000 ft. | 0 - 100% RH, =-3% from 20-80% | 3.3 V | - | -40C to 85C | 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa |
SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic) - SEN-14348 - SparkFun Electronics | 0 to 30,000 feet (9.2 km), relative accuracy of 3.3 feet (1m) at sea level, 6.6 (2m) at 30,000 feet | 0--100% RH, =-3% from 20--80% | 3.3 V | - | -40C to 85C | 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa |
SparkFun Atmospheric Sensor Breakout - BME280 (with Headers) - SEN-13905 - SparkFun Electronics | 0 to 30,000 ft (9.2 km), relative accuracy of 3.3 ft (1 m) at sea level, 6.6 (2 m) at 30,000 ft. | 0 - 100% RH, =-3% from 20-80% | 3.3 V | - | -40C to 85C | 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa |
Product | Average | Default I2C address | Dynamics | GEO | Horizontal Position Accuracy | Jumpers LEDs x 4 UART2 | Max Altitude | Max G | Max Navigation Rate | Max Velocity | Peak | Price | TP | Time to First Fix | Velocity | ZED-F9P Current Consumption | input voltage | uart |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
u-blox ZED-F9P NEO-D9S Combo Breakout - SPX-20167 - SparkFun Electronics | 35mA | 0x43 | +/- 2g acceleration for all data rates (600 bit/s, 1200 bit/s, 2400 bit/s, 4800 bit/s) | Geofence | 2.5m without RTK 0.010m with RTK | TX2-RX2 RX2-TX2 I2C Pull-Up Resistors USB Shield | 50km (49.7 miles) | ≤4G | PVT (basic location over UBX binary protocol) - 25Hz RTK - 20Hz Raw - 25Hz | 500m/s (1118mph) | 130mA | - | Timing Pulse (Pulse Per Second) | 25s (cold), 2s (hot) | Up to and including 300 km/h | 68mA - 130mA (varies with constellations and tracking state) | 5V or 3.3V but all logic is 3.3V | TX2-RX2 RX2-TX2 |
Product | Average Current Consumption | Frequency Range | Price | Sensitivity | Signal-to-Noise Ratio | Supply Voltage | load |
---|---|---|---|---|---|---|---|
SparkFun Analog MEMS Microphone Breakout - SPH8878LR5H-1 - BOB-19389 - SparkFun Electronics | 265µA | 7Hz-36kHz | - | -44dBV/Pa (Single-Ended Mode) | 66dBV/Pa | 2.3-3.6V | 134dB SPL |
Product | Bit rates (FSK) | Encryption | Modulation types | Packet buffer (FIFO) | Price | Receive sensitivity | Transmit power | Voltage range | current consumption |
---|---|---|---|---|---|---|---|---|---|
SparkFun RFM69 Breakout (915MHz) - WRL-12775 - SparkFun Electronics | 1.2kbps to 300kbps | AES 128-bit (optional) | FSK GFSK MSK GMSK OOK | 66 bytes | - | down to -120dBm at 1.2kbps | -18dBm (0.016mW) to +20dBm (100mW) in 1dBm steps | 3.6 V | 0.1uA sleep, 1.25mA standby, 16mA receive, 130mA transmit (max) |
SparkFun RFM69 Breakout (434MHz) - WRL-12823 - SparkFun Electronics | 1.2kbps to 300kbps | AES 128-bit (optional) | FSK GFSK MSK GMSK OOK | 66 bytes | - | down to -120dBm at 1.2kbps | -18dBm (0.016mW) to +20dBm (100mW) in 1dBm steps | 3.6 V | 0.1uA sleep, 1.25mA standby, 16mA receive, 130mA transmit (max) |
Product | Board | Mounting Holes | Price | Screen | Weight |
---|---|---|---|---|---|
2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket - EYESPI Connector | 81.3mm x 62.5mm / 3.2" x 2.46" | 76.2mm x 57.2mm / 3" x 2.25" | $29.95 | 69.6mm x 45.2mm / 2.74" x 1.78" | 44g |
2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket - EYESPI Connector | 81.3mm x 62.5mm / 3.2" x 2.46" | 76.2mm x 57.2mm / 3" x 2.25" | $29.95 | 69.6mm x 45.2mm / 2.74" x 1.78" | 44g |
Product | Board | Price |
---|---|---|
SparkFun Full-Bridge Motor Driver Breakout - L298N - BOB-09540 - SparkFun Electronics | 1.6x0.85 inches | - |
Product | Built-in Sensing Functions | I2C Address (7-bit) | Low Power | Price | measurement range |
---|---|---|---|---|---|
SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic) - SEN-17241 - SparkFun Electronics | Activity (presence of motion) & inactivity (absence of motion) User defined acceleration level on any axis Functions can be mapped to interrupt pins 32 level FIFO for reduced processor intervention & system power consumption | 0x1D (Default), 0x53 | Less than 300 µA at maximum data rate 0.1 µA in Standby Mode | - | ±0.5g, ±1g, ±2g, ±4g |
Product | Cold | Current | Heading Accuracy | Horizontal Position Accuracy | Hot | Max Altitude | Max G | Max Navigation Rate | Max Velocity | Price | Time Pulse Accuracy | Velocity Accuracy | Voltage |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic) - GPS-16344 - SparkFun Electronics | 26 s | ~85mA to ~130mA (varies with constellations and tracking state) | 0.003491 rad | 0.20m with RTK | 2 s | 80km (49.7 miles) | ≤4G | Up to 30Hz | 500m/s (1118mph) | - | 30ns | 0.5 m/s | 5V or 3.3V but all logic is 3.3V |
Product | Current | Horizontal Position Accuracy | Max Altitude | Max Navigation Rate | Max Velocity | Price | Time to First Fix | Voltage | Weight | dimension |
---|---|---|---|---|---|---|---|---|---|---|
SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic) - GPS-16481 - SparkFun Electronics | 68mA - 130mA (varies with constellations and tracking state) | 2.5m without RTK 0.010m with RTK | 50km (31 miles) | PVT (basic location over UBX binary protocol) - 25Hz RTK - 20Hz Raw - 25Hz | 500m/s (1118mph) | - | 25s (cold), 2s (hot) | 5V or 3.3V but all logic is 3.3V | 6.8g | 43.5mm x 43.2mm (1.71in x 1.7in) |
Product | Current Limit | Price | Size | Weight |
---|---|---|---|---|
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board | 1.2 A | $6.95 | 27mm x 19mm x 3mm / 1.1" x 0.7" x 0.1" | 1.8g |
TB6612 1.2A DC/Stepper Motor Driver Breakout Board - ROB-20679 - SparkFun Electronics | 1.2 A | - | 27mm x 19mm x 3mm / 1.1" x 0.7" x 0.1" | 1.8g |
Product | Current draw is based mostly on the backlight | Price | Weight | dimension |
---|---|---|---|---|
2.2" 18-bit color TFT LCD display with microSD card breakout - EYESPI Connector | with full on backlight, current draw is approx 100mA | $24.95 | 18.43g | 40.63mm / 1.59" x 66.35mm / 2.61" x 6.05mm / 0.23" |
2.2" 18-bit color TFT LCD display with microSD card breakout - EYESPI Connector | with full on backlight, current draw is approx 100mA | $24.95 | 18.43g | 40.63mm / 1.59" x 66.35mm / 2.61" x 6.05mm / 0.23" |
Product | Current draw is based on LED backlight usage | Mounting Holes | Price | Weight | dimension |
---|---|---|---|---|---|
Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout - ST7735R | with full backlight draw is ~25mA | 36mm x 36mm / 1.4" x 1.4" | $14.95 | 10.6g | 33m x 45mm x 7mm / 1.3" x 1.8" x 0.3" |
Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout - ST7735R | with full backlight draw is ~25mA | 36mm x 36mm / 1.4" x 1.4" | $14.95 | 10.6g | 33m x 45mm x 7mm / 1.3" x 1.8" x 0.3" |
Product | Current draw is based on LED backlight usage | Price | dimension |
---|---|---|---|
1.8" Color TFT LCD display with MicroSD Card Breakout - ST7735R | with full backlight draw is ~50mA | $19.95 | 1.35" x 2.2" x 0.25" (34mm x 56mm x 6.5mm) |
1.8" Color TFT LCD display with MicroSD Card Breakout - ST7735R | with full backlight draw is ~50mA | $19.95 | 1.35" x 2.2" x 0.25" (34mm x 56mm x 6.5mm) |
Product | Detection and Classification reports | Price |
---|---|---|
Adafruit 9-DOF Orientation IMU Fusion Breakout - BNO085 (BNO080) - STEMMA QT / Qwiic | Stability Detection and ClassificationSignificant Motion DetectorTap, Step, and Shake DetectorsActivity Classification | $24.95 |
Adafruit 9-DOF Orientation IMU Fusion Breakout - BNO085 (BNO080) - STEMMA QT / Qwiic | Stability Detection and ClassificationSignificant Motion DetectorTap, Step, and Shake DetectorsActivity Classification | $24.95 |
Product | Display current draw is completely dependent on your usage | PCB size | Price |
---|---|---|---|
OLED Breakout Board - 16-bit Color 0.96" w/microSD holder | each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~25mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate | 31.5mm x 35.5 x 5mm | $29.95 |
OLED Breakout Board - 16-bit Color 0.96" w/microSD holder | each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~25mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate | 31.5mm x 35.5 x 5mm | $29.95 |
Product | Display current draw is completely dependent on your usage | Price | dimension |
---|---|---|---|
OLED Breakout Board - 16-bit Color 1.5" w/microSD holder - EYESPI Connector | each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~30mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate | $39.95 | 43.17mm / 1.7" x 42mm / 1.65" x 5.42mm / 0.2" |
OLED Breakout Board - 16-bit Color 1.27" w/microSD holder - EYESPI Connector | each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~30mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate | $29.95 | 33.8mm x 27mm |
OLED Breakout Board - 16-bit Color 1.5" w/microSD holder - EYESPI Connector | each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~30mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate | $39.95 | 43.17mm / 1.7" x 42mm / 1.65" x 5.42mm / 0.2" |
Product | Dynamic range (Lux) | Interface | Price | Voltage range | temperature |
---|---|---|---|---|---|
Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout | 0.1 to 40,000 Lux | I2C | $5.95 | 2.7-3.6V | -30 to 80 *C |
Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout | 0.1 to 40,000 Lux | I2C | $5.95 | 2.7-3.6V | -30 to 80 *C |
Product | ESD protection | Price |
---|---|---|
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic | ±4000V HBM (MIL-STD-883H Method 3015.8 standard) | $4.95 |
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic | ±4000V HBM (MIL-STD-883H Method 3015.8 standard) | $4.95 |
Product | Endurance | I2C Address (7-bit) | Memory | Page Write Buffer | Power | Price | Read Current | Write Current | data retention |
---|---|---|---|---|---|---|---|---|---|
SparkFun Qwiic EEPROM Breakout - 512Kbit - COM-18355 - SparkFun Electronics | 1,000,000 Program/Erase Cycles | 0x50 (Default), 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57 | 512-Kb (kilobit) | 128 bytes | 3.3 V | - | 1mA | 1.8mA - 2.5mA | 3.156E+09 s |
Product | Extremely low current | Price | Voltage |
---|---|---|---|
SparkFun Human Presence Sensor Breakout - AK9753 (Qwiic) - SEN-14349 - SparkFun Electronics | 100µA | - | 3.3 V |
Product | Field of View | Operating Voltage | Price | Refresh Rate | Resolution | current consumption | i2c address | measurement range |
---|---|---|---|---|---|---|---|---|
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic) - SEN-14843 - SparkFun Electronics | 110°x75° | 3V-3.6V | - | 0.5Hz-64Hz | ±1.5°C | ~18mA | 0x33 | -40°C-300°C |
SparkFun IR Array Breakout - 55 Degree FOV, MLX90640 (Qwiic) - SEN-14844 - SparkFun Electronics | 55°x35° | 3V-3.6V | - | 0.5Hz-64Hz | ±1.5°C | ~18mA | 0x33 | -40°C-300°C |
Product | Frequency Range | Price | Weight | dimension | load |
---|---|---|---|---|---|
SparkFun Analog MEMS Microphone Breakout - VM2020 - BOB-21537 - SparkFun Electronics | 1E+04 Hz | - | 0.54g | 0.40" x 0.55" (10.16mm x 13.97mm) | ~10% distortion at 152dB |
Product | From I2C | From RF | Internal tuning capacitance | Price | Single supply voltage | System configuration | User memory | Write cycles endurance | data retention |
---|---|---|---|---|---|---|---|---|---|
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic | typical 5ms for 1 byte | typical 5ms for 1 block | 28.5 pF | $3.95 | 5.5 V | protected in write by a 64-bit password in RF and a 64-bit password in I2C | 1 to 4 configurable areas, protectable in read and/or write by three 64-bit passwords in RF and one 64-bit password in I2C | 1 million write cycles at 25 °C600k write cycles at 85 °C500k write cycles at 105 °C400k write cycles at 125 °C | 1.262E+09 s |
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic | typical 5ms for 1 byte | typical 5ms for 1 block | 28.5 pF | $3.95 | 5.5 V | protected in write by a 64-bit password in RF and a 64-bit password in I2C | 1 to 4 configurable areas, protectable in read and/or write by three 64-bit passwords in RF and one 64-bit password in I2C | 1 million write cycles at 25 °C600k write cycles at 85 °C500k write cycles at 105 °C400k write cycles at 125 °C | 1.262E+09 s |
Product | Full Accuracy | Humidity Range | Operational | Price | i2c address | pressure |
---|---|---|---|---|---|---|
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic) - SEN-15440 - SparkFun Electronics | 0°C-65°C (32°F-149°F) | 0-100% RH | -40°C-85°C (-40°F-185°F) | - | 0x77 (Default) or 0x76 | 300-1100 hPa (30,000-110,000 Pa or approx. 4.35-15.95 PSI) |
Product | Gas Resolution of gas sensor resistance | I2C Addresses | Operating range | Price | Relative accuracy | Resolution | Resolution of gas sensor resistance | Uses I2C interface (Qwiic-enabled) I2C Addresses | absolute accuracy |
---|---|---|---|---|---|---|---|---|---|
SparkFun Environmental Sensor Breakout - BME680 (Qwiic) - SEN-16466 - SparkFun Electronics | 0.05% to 0.11% | 0x77 (Default) or 0x76 | -40°C to +85 °C | - | ±12Pa (25°C to 40°C @ constant RH) | 0.01 °C | 0.05% to 0.11% | 0x77 (Default) or 0x76 2x Qwiic Connectors | ±0.5°C to ±1.0°C |
Product | Header connections | Price | Protection | Standoff connections |
---|---|---|---|---|
Pi-EzConnect Terminal Block Breakout HAT | Can use 0.1" (2.54mm) spaced headers, male or female | $19.95 | Resettable 8V, 1.6A fuse for 3.3V and 5V power | Matches Raspberry Pi model A+, B+, and Pi 2 |
Product | Height | Length | Note | Price | Weight | Width |
---|---|---|---|---|---|---|
Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) | 3.28mm/0.12in | 20mm/0.8in | The terminal blocks included with your product may be blue or black. | $14.95 | 1.33g/0.05oz | 20mm/0.8in |
Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) | 3.28mm/0.12in | 20mm/0.8in | The terminal blocks included with your product may be blue or black. | $14.95 | 1.33g/0.05oz | 20mm/0.8in |
Product | Height | Length | Price | Uses a proper level shifting chip, not resistors | Weight | Width |
---|---|---|---|---|---|---|
MicroSD card breakout board+ | 3.75mm/0.15in | 31.85mm/1.25in | $7.5 | less problems, and faster read/write access | 3.43g/0.12oz | 25.4mm/1.00in |
MicroSD card breakout board+ | 3.75mm/0.15in | 31.85mm/1.25in | $7.5 | less problems, and faster read/write access | 3.43g/0.12oz | 25.4mm/1.00in |
Product | Height | Length | Price | Weight | Width |
---|---|---|---|---|---|
USB Mini-B Breakout Board | 2mm/0.1" | 21mm/0.8" | $1.95 | 1.6g | 13mm/0.5" |
Adafruit DS1307 Real Time Clock Assembled Breakout Board | 5mm/0.2in | 25.8mm/1.02in | $7.5 | 2.3g/0.09oz | 21.7mm/0.85in |
L3GD20H Triple-Axis Gyro Breakout Board - L3GD20/L3G4200 Upgrade - L3GD20H | 0.003 m | 0.03065 m | $12.5 | 2.02g | 0.01911 m |
Touch screen breakout board (0.5mm FPC) | 3.81mm/0.15in | 12.97mm/0.5in | $3.95 | 0.57g/0.02oz | 12.97mm/0.5in |
DS1307 Real Time Clock breakout board kit | 5mm/0.2in | 24.21mm/0.95in | $7.95 | 4g/0.14oz | 30.44mm/1.2in |
L3GD20H Triple-Axis Gyro Breakout Board - L3GD20/L3G4200 Upgrade - L3GD20H | 0.003 m | 0.03065 m | $12.5 | 2.02g | 0.01911 m |
DS1307 Real Time Clock breakout board kit | 5mm/0.2in | 24.21mm/0.95in | $7.95 | 4g/0.14oz | 30.44mm/1.2in |
Touch screen breakout board (0.5mm FPC) | 3.81mm/0.15in | 12.97mm/0.5in | $3.95 | 0.57g/0.02oz | 12.97mm/0.5in |
Atmega32u4 Breakout Board | 5.78mm/0.23in | 51.15mm/2.01in | $19.9 | 5.14g/0.18oz | 22.7m../0.89in |
Product | Height (w/ out micro USB connector) | Price | Weight | dimension |
---|---|---|---|---|
USB Micro-B Breakout Board | 1mm / 0.04" | $1.95 | 0.64g | 10mm x 20mm x 4mm / 0.4" x 0.8" x 0.2" |
USB Micro-B Breakout Board | 1mm / 0.04" | $1.95 | 0.64g | 10mm x 20mm x 4mm / 0.4" x 0.8" x 0.2" |
Product | Height with JST | Price | Weight |
---|---|---|---|
Switched JST-PH 2-Pin SMT Right Angle Breakout Board | 0.0073 m | $2.5 | 1g |
Switched JST-PH 2-Pin SMT Right Angle Breakout Board | 0.0073 m | $2.5 | 1g |
Product | Height with JST | Price | Weight | dimension |
---|---|---|---|---|
JST-PH 2-Pin SMT Right Angle Breakout Board | 0.0073 m | $1.5 | 0.7g | 13mm x 10mm x 2mm / 0.5" x 0.4" x 0.08" |
JST-PH 2-Pin SMT Right Angle Breakout Board | 0.0073 m | $1.5 | 0.7g | 13mm x 10mm x 2mm / 0.5" x 0.4" x 0.08" |
Product | High Performance Operating Current Consumption (400Hz ODR + Wake-Up Detection) | Low Noise | Low Power Operating Current Consumption (0.781Hz ODR + Wake-Up Detection) | Price | Standby Current Consumption | i2c address | measurement range |
---|---|---|---|---|---|---|---|
SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic) - SEN-17871 - SparkFun Electronics | 148µA | 130µg/√Hz (varies based on ODR, power mode & other settings) | 0.53µA | - | 0.5µA | 0x1E (0x1F alternate) | ±2g, ±4g, ±8g, ±16g (User Selectable) |
SparkFun Triple Axis Accelerometer Breakout - KX134 (Qwiic) - SEN-17589 - SparkFun Electronics | 148µA | 130µg/√Hz (varies based on ODR, power mode & other settings) | 0.53µA | - | 0.5µA | 0x1E (0x1F alternate) | ±8g, ±16g, ±32g, ±64g (User Selectable) |
Product | High rH sensitivity | Humidity accuracy | Price | temperature |
---|---|---|---|---|
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic | 0.004% rH/LSB | ± 3.5% rH, 20 to +80% rH | $9.95 | ± 0.5°C,15 to +40 °C |
Product | I2C Addresses | Price |
---|---|---|
SparkFun Transparent OLED HUD Breakout (Qwiic) - LCD-15079 - SparkFun Electronics | 0x30, 0x31 | - |
SparkFun Transparent Graphical OLED Breakout (Qwiic) - LCD-15173 - SparkFun Electronics | 0x3C (Default), 0x3D | - |
Product | In between Pitch | Pin-to-pin Distance | Price |
---|---|---|---|
HDMI Plug Breakout Board | 0.006 m | 2.54mm / 1" | $3.5 |
Product | Integrated Modules | Operating Voltage | Price | Qualitative Detection Range | i2c address |
---|---|---|---|---|---|
SparkFun Proximity Sensor Breakout - 20cm, VCNL4040 (Qwiic) - SEN-15177 - SparkFun Electronics | Infrared Emitter (IRED), Ambient Light Sensor (ALS), Proximity Sensor (PS) | 3.3 V | - | 20cm | 0x60 |
Product | Interface | Price | Resolution | Working Voltage |
---|---|---|---|---|
Kingduino HMC5883L Triple Axis Compass Magnetometer Sensor Module Breakout | I2C | - | 5 milli-gauss | 2.16-3.6VDC |
Product | Interface Level | Particle Counting Efficiency | Particle Effective Range (PM2.5 standard) | Particle Maximum Consistency Error (PM2.5 standard) | Particle Maximum Range (PM2.5 standard) | Particle Range of measurement | Particle Resolution | Price |
---|---|---|---|---|---|---|---|---|
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic | 3.3V logic, L <0.8V, H >2.7V | 50% @ 0.3μm 98% @ >=0.5 μ m | 0~500 μ g/m ³ | ± 10% @ 100~500 μ g/m ³±10 μ g/m ³ @0~100 μ g/m ³ | ≥ 1000 μ g/m ³ | 0.3~1.0,1.0~2.5, 2.5~10 Micrometer | 1 μ g/m ³ | $44.95 |
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic | 3.3V logic, L <0.8V, H >2.7V | 50% @ 0.3μm 98% @ >=0.5 μ m | 0~500 μ g/m ³ | ± 10% @ 100~500 μ g/m ³±10 μ g/m ³ @0~100 μ g/m ³ | ≥ 1000 μ g/m ³ | 0.3~1.0,1.0~2.5, 2.5~10 Micrometer | 1 μ g/m ³ | $44.95 |
Product | Length | Price |
---|---|---|
USB Type A Jack Breakout Cable with Premium Female Jumpers - 30cm long | 30cm28AWG | $1.95 |
USB Type A Jack Breakout Cable with Premium Female Jumpers - 30cm long | 30cm28AWG | $1.95 |
Product | Logic | Power | Price | Weight | dimension |
---|---|---|---|---|---|
Adafruit HDC1008 Temperature & Humidity Sensor Breakout Board | 3-5VDC | 3-5VDC | $7.5 | 1.0g | 18mm x 15mm x 2mm / 0.7" x 0.6" x 0.1" |
Adafruit HDC1008 Temperature & Humidity Sensor Breakout Board | 3-5VDC | 3-5VDC | $7.5 | 1.0g | 18mm x 15mm x 2mm / 0.7" x 0.6" x 0.1" |
Product | Low Standby (Idle) Current Consumption | Price |
---|---|---|
Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic | 3 μA (not including breakout board regulator and LED) | $5.95 |
Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic | 3 μA (not including breakout board regulator and LED) | $5.95 |
Product | Mounting hole distance | Price | Weight |
---|---|---|---|
20mm Coin Cell Breakout Board (CR2032) | 18mm x 22mm / 0.7" x 0.9" | $2.5 | 3g |
20mm Coin Cell Breakout Board (CR2032) | 18mm x 22mm / 0.7" x 0.9" | $2.5 | 3g |
12mm Coin Cell Breakout Board | 10mm x 16mm / 0.4" x 0.6" | $1.95 | 1.5g |
12mm Coin Cell Breakout Board | 10mm x 16mm / 0.4" x 0.6" | $1.95 | 1.5g |
Product | Note | Price |
---|---|---|
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT | The terminal block included with your product may be blue or black. You may get an off-white or black JST connector. | $9.95 |
SN74HC165 Shift-In Breakout - BOB-11512 - SparkFun Electronics | The SER_IN and SER_OUT labels are swapped. | - |
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT | The terminal block included with your product may be blue or black. You may get an off-white or black JST connector. | $9.95 |
Product | Operating Current | Operating Voltage | Price |
---|---|---|---|
SparkFun Coulomb Counter Breakout - LTC4150 - BOB-12052 - SparkFun Electronics | 1 A | 2.7V - 8.5V | - |
Product | Operating Current | Price |
---|---|---|
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic | 200 μA (typical) | $4.95 |
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic | 200 μA (typical) | $4.95 |
Product | Operating Voltage | Price |
---|---|---|
SparkFun PIR Breakout - 170uA w/ Headers - SEN-22000 - SparkFun Electronics | 2.3 - 4.0V | - |
SparkFun PIR Breakout - 170uA (EKMC4607112K) - SEN-17372 - SparkFun Electronics | 2.3 - 4.0V | - |
SparkFun PIR Breakout - 1uA (EKMB1107112) - SEN-17373 - SparkFun Electronics | 2.3 - 4.0V | - |
SparkFun ToF Range Finder Breakout - VL6180 - SEN-12784 - SparkFun Electronics | 2.8 V | - |
Product | Operating Voltage | Price | Range | Typical Current |
---|---|---|---|---|
SparkFun Triple Axis Accelerometer Breakout - ADXL377 - SEN-12803 - SparkFun Electronics | 1.8V - 3.6V | - | ±200g | 300 μA |
Product | Operating Voltage | Price | Screen Size |
---|---|---|---|
SparkFun Micro OLED Breakout - LCD-13003 - SparkFun Electronics | 3.3 V | - | 64x48 pixels (0.66" Across) |
Product | Operating Voltage | Price | Supply Current | UVA Resolution | i2c address |
---|---|---|---|---|---|
SparkFun UV Light Sensor Breakout - VEML6075 (Qwiic) - SEN-15089 - SparkFun Electronics | 1.7V-3.6V | - | 480 µA | 0.93 counts/µW/cm2 | 0x10 |
Product | Operating Voltage | Price | i2c address | temperature |
---|---|---|---|---|
SparkFun STEMMA QT / Qwiic TCA9548A Mux Breakout - 8 Channel | 1.65V - 5.5V | $13.95 | 0x70 (default) up to 0x77 | -40 - 85° C |
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A) - BOB-16784 - SparkFun Electronics | 1.65V - 5.5V | - | 0x70 (default) up to 0x77 | -40 - 85° C |
SparkFun STEMMA QT / Qwiic TCA9548A Mux Breakout - 8 Channel | 1.65V - 5.5V | $13.95 | 0x70 (default) up to 0x77 | -40 - 85° C |
Product | Operating Voltage Range | Price | temperature |
---|---|---|---|
SparkFun Digital Temperature Sensor Breakout - AS6212 (Qwiic) - SEN-18521 - SparkFun Electronics | 1.7V - 3.6V | - | ±0.2°C from -10°C to 65°C ±0.3°C from -40°C to -10°C and 65°C to 85°C ±0.5°C from 85°C to 125°C |
Product | Operating range | Price | Resolution | Typical accuracy | Uses I2C interface (Qwiic-enabled) I2C Address | i2c address |
---|---|---|---|---|---|---|
SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic) - SEN-16467 - SparkFun Electronics | -40°C to +125 °C | - | 0.01 %RH | ±2 %RH | 0x70 2x Qwiic Connectors | 0x70 |
Product | Operational Relative Humidity range | Price | temperature |
---|---|---|---|
Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic | 0 to 100 RH% (+-3 % typical accuracy over entire range) | $4.5 | -40 to 85 °C (+-1 °C typical accuracy over entire range) |
Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic | 0 to 100 RH% (+-3 % typical accuracy over entire range) | $4.5 | -40 to 85 °C (+-1 °C typical accuracy over entire range) |
Product | Optimal sensing distance | Price |
---|---|---|
SparkFun Line Sensor Breakout - QRE1113 (Digital) - ROB-09454 - SparkFun Electronics | 0.125" (3mm) | - |
SparkFun Line Sensor Breakout - QRE1113 (Analog) - ROB-09453 - SparkFun Electronics | 0.125" (3mm) | - |
Product | Option one | Option two | Price |
---|---|---|---|
Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic | Lightly pulled up 'input' - by default it will read as a high logic level, but connecting the GPIO to ground will cause it to read as a low logic level. | Strong 20mA low-driving transistor sink output. This means the output is 'forced' to be low and will always read as a low logic level. | $4.95 |
Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic | Lightly pulled up 'input' - by default it will read as a high logic level, but connecting the GPIO to ground will cause it to read as a low logic level. | Strong 20mA low-driving transistor sink output. This means the output is 'forced' to be low and will always read as a low logic level. | $4.95 |
Adafruit PCF8575 I2C 16 GPIO Expander Breakout - STEMMA QT / Qwiic | Lightly pulled up 'input' - by default it will read as a high logic level, but connecting the GPIO to ground will cause it to read as a low logic level. | Strong 20mA low-driving transistor sink output. This means the output is 'forced' to be low and will always read as a low logic level. | $5.95 |
Adafruit PCF8575 I2C 16 GPIO Expander Breakout - STEMMA QT / Qwiic | Lightly pulled up 'input' - by default it will read as a high logic level, but connecting the GPIO to ground will cause it to read as a low logic level. | Strong 20mA low-driving transistor sink output. This means the output is 'forced' to be low and will always read as a low logic level. | $5.95 |
Product | Output Channel Selection | Output Power | Price | Quiescent Current | Sample Rate | Sample Resolution | Supply Voltage Range |
---|---|---|---|---|---|---|---|
SparkFun I2S Audio Breakout - MAX98357A - DEV-14809 - SparkFun Electronics | Left, Right, or Left/2 + Right/2 (Default). | 3.2W into 4Ω at 5V. | - | 2.4mA. | 8kHz - 96kHz. | 16/32 bit. | 2.5V - 5.5V. |
Product | Output Signal | Price | Sensing Range |
---|---|---|---|
SparkFun Single Axis Accelerometer Breakout - ADXL193 (+/-250g) - SEN-09332 - SparkFun Electronics | Analog (ratiometric) | - | ± 250g |
Product | PCB | Price | Screen | Weight |
---|---|---|---|---|
3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket - HXD8357D | 56mm x 97mm x 2mm / 2.2" x 3.8" x 0.1" | $39.95 | 56mm x 85mm x 4mm / 2.2" x 3.4" x 0.2" | 52g |
3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket - HXD8357D | 56mm x 97mm x 2mm / 2.2" x 3.8" x 0.1" | $39.95 | 56mm x 85mm x 4mm / 2.2" x 3.4" x 0.2" | 52g |
Product | Pins broken out | Price |
---|---|---|
SparkFun Transceiver Breakout - nRF24L01+ - WRL-00691 - SparkFun Electronics | VCC, CE, CSN, SCK, MOSI, MISO, IRQ, GND | - |
SparkFun Transceiver Breakout - nRF24L01+ (RP-SMA) - WRL-00705 - SparkFun Electronics | VCC, CE, CSN, SCK, MOSI, MISO, IRQ, GND | - |
Product | Potentiometer (L x W x H) | Price | dimension |
---|---|---|---|
STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear | 11.8mm x 10mm x 20mm | $3.95 | 28mm x 21mm |
STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear | 11.8mm x 10mm x 20mm | $3.95 | 28mm x 21mm |
Product | Power | Price | Weight | dimension |
---|---|---|---|---|
Analog 2-axis Thumb Joystick with Select Button + Breakout Board | Usable with any voltage up to 5V, 2 analog outputs. 1 milliamp draw when used with 5V | $5.95 | 12 grams ( 0.4oz ) | 1.5" wide x 1.5" long x 1.25" tall (when assembled) |
Analog 2-axis Thumb Joystick with Select Button + Breakout Board | Usable with any voltage up to 5V, 2 analog outputs. 1 milliamp draw when used with 5V | $5.95 | 12 grams ( 0.4oz ) | 1.5" wide x 1.5" long x 1.25" tall (when assembled) |
Product | Power connections | Price | Three power input/output options |
---|---|---|---|
SparkFun Buck Regulator Breakout - 5V (AP63357) - COM-21255 - SparkFun Electronics | VIN - Power In (6V to 32V) GND - Common Ground VOUT - Power Out (Regulated 5V) EN - Enable (Pull high to enable the power output) | - | Pre-assembled 4-pin screw terminal Five 0.1in. spaced PTH pins Three plated slots for a DC barrel jack (input only) |
Product | Price | RAW | VCC |
---|---|---|---|
SparkFun SAMD21 Mini Breakout - DEV-13664 - SparkFun Electronics | - | 3.5V-6.0V | 600mA @3.3V |
Product | Price | Sensitivity | Update Rate |
---|---|---|---|
SparkFun GPS Breakout - XA1110 (Qwiic) - GPS-14414 - SparkFun Electronics | - | -165dBm | up to 10Hz |
Product | Price | Size | Weight |
---|---|---|---|
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board | $5.95 | 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1" | 1.5g |
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board | $5.95 | 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1" | 1.5g |
Product | Price | Sleep Current | Supply Voltage |
---|---|---|---|
SparkFun Authentication Chip Breakout - ATSHA204 - BOB-11551 - SparkFun Electronics | - | <150nA | 2.0-5.5V |
Product | Price | Smart embedded functions and interrupts | i2c address | temperature |
---|---|---|---|---|
SparkFun 6DoF IMU Breakout - ISM330DHCX (Qwiic) - SEN-19764 - SparkFun Electronics | - | tilt detection, free-fall, wakeup, 6D/4D orientation, click and double-click | 0x6B (Default), 0x6A (Alternate) | -40 to +105°C |
Product | Price | Space-saving | input voltage |
---|---|---|---|
FLiR Lepton Breakout Board V2 - BOB-16912 - SparkFun Electronics | - | (29.5 mm × 29.0 mm) | 5.5 V |
Product | Price | Thickness | Weight |
---|---|---|---|
2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341 | $29.95 | 7.9mm / 0.3" | 40g |
Product | Price | Three Modes |
---|---|---|
SparkFun Triple Axis Accelerometer Breakout - LIS3DH (with Headers) - SEN-20659 - SparkFun Electronics | - | Power-Down Normal Low-Power |
SparkFun Triple Axis Accelerometer Breakout - LIS3DH - SEN-13963 - SparkFun Electronics | - | Power-Down Normal Low-Power |
Product | Price | Two operation modes |
---|---|---|
SparkFun Audio-Sound Breakout - WTV020SD - WIG-11125 - SparkFun Electronics | - | * |
Product | Price | UV spectrum sensitivity | Voltage Supply |
---|---|---|---|
Adafruit VEML6070 UV Index Sensor Breakout | $5.95 | 320-410nm (peak at 355nm) | 2.7-5.5V |
Adafruit VEML6070 UV Index Sensor Breakout | $5.95 | 320-410nm (peak at 355nm) | 2.7-5.5V |
Product | Price | Ultra Low Power |
---|---|---|
SparkFun Triple Axis Accelerometer Breakout - ADXL345 - SEN-09836 - SparkFun Electronics | - | 40uA in measurement mode, 0.1uA in standby@ 2.5V |
Product | Price | Weight |
---|---|---|
SWD (2x5 1.27mm) Cable Breakout Board | $2.95 | 1g |
SWD (2x5 1.27mm) Cable Breakout Board | $2.95 | 1g |
Adafruit ALS-PT19 Analog Light Sensor Breakout | $2.5 | 0.2g |
Adafruit ALS-PT19 Analog Light Sensor Breakout | $2.5 | 0.2g |
Adafruit FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & Stemma QT | $14.95 | 3.4g |
Product | Price | Weight | dimension | smt test socket tqfp breakout |
---|---|---|---|---|
SMT Test Socket - TQFP-32 Breakout | $49.95 | 37.2g | 1.75" x 1.4" | 12) |
SMT Test Socket - TQFP-48 Breakout | $99.95 | 40.1g | 63.5mm x 38.2mm / 2.5" x 1.5" | 12) |
Product | Price | Wide input-voltage range | temperature |
---|---|---|---|
ADT7410 High Accuracy I2C Temperature Sensor Breakout Board | $5.95 | 5.5 V | ±0.5°C from −40°C to +105°C (2.7 V to 3.6 V)±0.4°C from −40°C to +105°C (3.0 V) |
ADT7410 High Accuracy I2C Temperature Sensor Breakout Board | $5.95 | 5.5 V | ±0.5°C from −40°C to +105°C (2.7 V to 3.6 V)±0.4°C from −40°C to +105°C (3.0 V) |
Product | Price | Wide voltage supply range |
---|---|---|
SparkFun Multiplexer Breakout - 8 Channel (74HC4051) - BOB-13906 - SparkFun Electronics | - | 2 -- 10V |
Product | Price | current consumption |
---|---|---|
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q - SEN-12756 - SparkFun Electronics | - | 6 μA – 165 μA |
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers) - BOB-13926 - SparkFun Electronics | - | 6μA – 165μA |
Product | Price | dimension | smt test socket tqfp breakout |
---|---|---|---|
SMT Test Socket - TQFP-44 Breakout | $54.95 | 2.3" x 1.8" | 12) |
SMT Test Socket - TQFP-44 Breakout | $54.95 | 2.3" x 1.8" | 12) |
Product | Price | i2c address |
---|---|---|
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic) - SEN-15335 - SparkFun Electronics | - | 0x69 (0x68 with Jumper) |
Product | Price | i2c address | temperature |
---|---|---|---|
SparkFun Photodetector Breakout - MAX30101 (Qwiic) - SEN-16474 - SparkFun Electronics | - | 0x57 (7-bit) | 0x57 (7-bit) |
SparkFun Photodetector Breakout - MAX30101 (Qwiic) - SEN-16474 - SparkFun Electronics | - | 0x57 (7-bit) | 0x57 (7-bit) |
Product | Price | input voltage |
---|---|---|
SparkFun Triple Axis Accelerometer and Gyro Breakout - MPU-6050 - SEN-11028 - SparkFun Electronics | - | 2.3 - 3.4V |
Product | Price | pcb mount terminal block |
---|---|---|
Terminal Block Breakout Module Board for Raspberry Pi Pico | $24.95 | 5.0mm/0.197" pitch |
Terminal Block Breakout Module for Raspberry Pi Pico - Screw Mount Version | $24.95 | pitch 5.0mm/0.197" |
Terminal Block Breakout Module Board for Raspberry Pi Pico | $24.95 | 5.0mm/0.197" pitch |
Terminal Block Breakout Module for Raspberry Pi Pico - Screw Mount Version | $24.95 | pitch 5.0mm/0.197" |