| Product | Assortment category | Bolt Depot product# | Category | Color | Depth | Grade | Height | Name | Plating | Price | Subcategory | Units | material | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| US, Large metal trays, Zinc plated grade 8 steel yellow, Hex bolts (coarse thread) w/ nuts 1/4" - 1/2" - Bolt Depot | Bolt Assortments | 7510 | Assortments | Yellow | 0.3048 m | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.0762 m | Hex bolts (coarse thread) w/ nuts 1/4" - 1/2" | Zinc Zinc plated for moderate corrosion resistance. | $194.34 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A tempered medium carbon steel. | 0.4572 m |
| US, Large metal trays, Zinc plated grade 8 steel yellow, Hex bolts (fine thread) w/ nuts 1/4" - 1/2" - Bolt Depot | Bolt Assortments | 7512 | Assortments | Yellow | 0.3048 m | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.0762 m | Hex bolts (fine thread) w/ nuts 1/4" - 1/2" | Zinc Zinc plated for moderate corrosion resistance. | $264.44 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A tempered medium carbon steel. | 0.4572 m |
| US, Large metal trays, Zinc plated grade 8 steel yellow, Hex nuts (coarse and fine thread) 1/4" - 3/4" - Bolt Depot | Nut and Washer Assortments | 7526 | Assortments | Yellow | 0.3048 m | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.0762 m | Hex nuts (coarse and fine thread) 1/4" - 3/4" | Zinc Zinc plated for moderate corrosion resistance. | $103.49 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A tempered medium carbon steel. | 0.4572 m |
| US, Small plastic compartment boxes, Zinc plated grade 8 steel yellow, Hex bolts (fine thread) w/ nuts, flat washers, and lock washers 1/4" - 3/8" - Bolt Depot | Bolt Assortments | 7471 | Assortments | Yellow | 0.1714 m | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.04445 m | Hex bolts (fine thread) w/ nuts, flat washers, and lock washers 1/4" - 3/8" | Zinc Zinc plated for moderate corrosion resistance. | $54.07 | Small plastic compartment boxes Small compartment boxes made of clear high strength oil resistant polypropylene. And featuring heavy duty hinges and two snap latches to secure closure and prevent parts from moving between compartments. Each box's overall dimensions are 11"(w) x 6-3/4"(d) x 1-3/4"(h). | US | Steel A tempered medium carbon steel. | 0.2794 m |
| Product | Assortment category | Bolt Depot product# | Category | Depth | Drive type | Grade | Head style | Height | Name | Price | Subcategory | Units | material | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| US, Large metal trays, Stainless steel 18-8, Phillips pan head machine screws w/ nuts #4 - 1/4" - Bolt Depot | Screw Assortments | 7480 | Assortments | 0.3048 m | Phillips Phillips drive is x-shaped for installation with a Phillips screw driver. | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | Pan Pan heads are slightly rounded with short vertical sides. | 0.0762 m | Phillips pan head machine screws w/ nuts #4 - 1/4" | $155.24 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Stainless steel | 0.4572 m |
| US, Small plastic compartment boxes, Stainless steel 18-8, Phillips pan head machine screws w/ nuts #4 - 1/4" - Bolt Depot | Screw Assortments | 7453 | Assortments | 0.1714 m | Phillips Phillips drive is x-shaped for installation with a Phillips screw driver. | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | Pan Pan heads are slightly rounded with short vertical sides. | 0.04445 m | Phillips pan head machine screws w/ nuts #4 - 1/4" | $46.56 | Small plastic compartment boxes Small compartment boxes made of clear high strength oil resistant polypropylene. And featuring heavy duty hinges and two snap latches to secure closure and prevent parts from moving between compartments. Each box's overall dimensions are 11"(w) x 6-3/4"(d) x 1-3/4"(h). | US | Stainless steel | 0.2794 m |
| US, Small plastic compartment boxes, Stainless steel 18-8, Slotted round head machine screws w/ nuts #6 - 1/4" - Bolt Depot | Screw Assortments | 7452 | Assortments | 0.1714 m | Slotted Slotted drive has a simple slot for a flat bladed screw driver. | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | Round Round heads are domed and look like half of a sphere. | 0.04445 m | Slotted round head machine screws w/ nuts #6 - 1/4" | $41.96 | Small plastic compartment boxes Small compartment boxes made of clear high strength oil resistant polypropylene. And featuring heavy duty hinges and two snap latches to secure closure and prevent parts from moving between compartments. Each box's overall dimensions are 11"(w) x 6-3/4"(d) x 1-3/4"(h). | US | Stainless steel | 0.2794 m |
| Product | Assortment category | Bolt Depot product# | Category | Depth | Drive type | Head style | Height | Name | Plating | Price | Subcategory | Units | material | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| US, Large metal trays, Zinc plated steel, Phillips flat head machine screws w/ nuts #4 - 1/4" - Bolt Depot | Screw Assortments | 7486 | Assortments | 0.3048 m | Phillips Phillips drive is x-shaped for installation with a Phillips screw driver. | Flat Flat heads are countersunk (cone shaped under the head) with a flat top. | 0.0762 m | Phillips flat head machine screws w/ nuts #4 - 1/4" | Zinc Zinc plated for moderate corrosion resistance. | $123.04 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A low carbon steel for general use. | 0.4572 m |
| US, Large metal trays, Zinc plated steel, Phillips pan head machine screws w/ nuts #4 - 1/4" - Bolt Depot | Screw Assortments | 7485 | Assortments | 0.3048 m | Phillips Phillips drive is x-shaped for installation with a Phillips screw driver. | Pan Pan heads are slightly rounded with short vertical sides. | 0.0762 m | Phillips pan head machine screws w/ nuts #4 - 1/4" | Zinc Zinc plated for moderate corrosion resistance. | $129.36 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A low carbon steel for general use. | 0.4572 m |
| Product | Assortment category | Bolt Depot product# | Category | Depth | Grade | Height | Name | Plating | Price | Subcategory | Units | material | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Metric, Large metal trays, Zinc plated class 8.8 steel, Metric hex nuts, and nylon insert lock nuts (coarse thread) 3mm - 14mm - Bolt Depot | Metric Nut and Washer Assortments | 7550 | Assortments | 0.3048 m | Class 8.8 A tempered medium carbon steel. Class 8.8 is hardened, but it is not as strong as class 10.9. It is commonly found in automotive applications. Class 8.8 is similar to grade 5. | 0.0762 m | Metric hex nuts, and nylon insert lock nuts (coarse thread) 3mm - 14mm | Zinc Zinc plated for moderate corrosion resistance. | $82.79 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | Metric | Steel | 0.4572 m |
| US, Large metal trays, Zinc plated grade 5 steel, Hex bolts (coarse thread) w/ nuts 1/4" - 1/2" - Bolt Depot | Bolt Assortments | 7506 | Assortments | 0.3048 m | Grade 5 Grade 5 falls between grade 2 and grade 8 in strength, and is commonly found in automotive applications. | 0.0762 m | Hex bolts (coarse thread) w/ nuts 1/4" - 1/2" | Zinc Zinc plated for moderate corrosion resistance. | $155.24 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A tempered medium carbon steel. | 0.4572 m |
| Metric, Large metal trays, Zinc plated class 8.8 steel, Metric nylon insert lock nuts (coarse thread) 3mm - 14mm - Bolt Depot | Metric Nut and Washer Assortments | 7551 | Assortments | 0.3048 m | Class 8.8 A tempered medium carbon steel. Class 8.8 is hardened, but it is not as strong as class 10.9. It is commonly found in automotive applications. Class 8.8 is similar to grade 5. | 0.0762 m | Metric nylon insert lock nuts (coarse thread) 3mm - 14mm | Zinc Zinc plated for moderate corrosion resistance. | $84.51 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | Metric | Steel | 0.4572 m |
| Metric, Large metal trays, Zinc plated class 8.8 steel, Metric hex nuts (coarse and fine thread) 3mm - 12mm - Bolt Depot | Metric Nut and Washer Assortments | 7549 | Assortments | 0.3048 m | Class 8.8 A tempered medium carbon steel. Class 8.8 is hardened, but it is not as strong as class 10.9. It is commonly found in automotive applications. Class 8.8 is similar to grade 5. | 0.0762 m | Metric hex nuts (coarse and fine thread) 3mm - 12mm | Zinc Zinc plated for moderate corrosion resistance. | $108.66 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | Metric | Steel | 0.4572 m |
| US, Large metal trays, Zinc plated grade 5 steel, Hex bolts (fine thread) w/ nuts 1/4" - 1/2" - Bolt Depot | Bolt Assortments | 7508 | Assortments | 0.3048 m | Grade 5 Grade 5 falls between grade 2 and grade 8 in strength, and is commonly found in automotive applications. | 0.0762 m | Hex bolts (fine thread) w/ nuts 1/4" - 1/2" | Zinc Zinc plated for moderate corrosion resistance. | $201.81 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A tempered medium carbon steel. | 0.4572 m |
| US, Small plastic compartment boxes, Zinc plated grade 5 steel, Hex bolts (fine thread) w/ nuts, flat washers, and lock washers 1/4" - 3/8" - Bolt Depot | Bolt Assortments | 7469 | Assortments | 0.1714 m | Grade 5 Grade 5 falls between grade 2 and grade 8 in strength, and is commonly found in automotive applications. | 0.04445 m | Hex bolts (fine thread) w/ nuts, flat washers, and lock washers 1/4" - 3/8" | Zinc Zinc plated for moderate corrosion resistance. | $43.69 | Small plastic compartment boxes Small compartment boxes made of clear high strength oil resistant polypropylene. And featuring heavy duty hinges and two snap latches to secure closure and prevent parts from moving between compartments. Each box's overall dimensions are 11"(w) x 6-3/4"(d) x 1-3/4"(h). | US | Steel A tempered medium carbon steel. | 0.2794 m |
| US, Small plastic compartment boxes, Zinc plated grade 5 steel, Hex bolts (coarse thread) w/ nuts, flat washers, and lock washers 1/4" - 3/8" - Bolt Depot | Bolt Assortments | 7468 | Assortments | 0.1714 m | Grade 5 Grade 5 falls between grade 2 and grade 8 in strength, and is commonly found in automotive applications. | 0.04445 m | Hex bolts (coarse thread) w/ nuts, flat washers, and lock washers 1/4" - 3/8" | Zinc Zinc plated for moderate corrosion resistance. | $35.06 | Small plastic compartment boxes Small compartment boxes made of clear high strength oil resistant polypropylene. And featuring heavy duty hinges and two snap latches to secure closure and prevent parts from moving between compartments. Each box's overall dimensions are 11"(w) x 6-3/4"(d) x 1-3/4"(h). | US | Steel A tempered medium carbon steel. | 0.2794 m |
| Metric, Large metal trays, Zinc plated class 8.8 steel, Metric hex nuts (coarse and fine thread) lock washers, and flat washers 6mm - 12mm - Bolt Depot | Metric Nut and Washer Assortments | 7552 | Assortments | 0.3048 m | Class 8.8 A tempered medium carbon steel. Class 8.8 is hardened, but it is not as strong as class 10.9. It is commonly found in automotive applications. Class 8.8 is similar to grade 5. | 0.0762 m | Metric hex nuts (coarse and fine thread) lock washers, and flat washers 6mm - 12mm | Zinc Zinc plated for moderate corrosion resistance. | $136.26 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | Metric | Steel | 0.4572 m |
| Product | Assortment category | Bolt Depot product# | Category | Depth | Grade | Height | Name | Price | Subcategory | Units | material | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Metric, Large metal trays, Stainless steel 18-8 (A-2), Metric stainless hex bolts (coarse thread) w/ nuts, flat washers and lock washers 6mm - 12mm - Bolt Depot | Metric Bolt Assortments | 7543 | Assortments | 0.3048 m | 18-8 Also known as A-2 stainless, 18-8 is the most common grade of stainless steel for general use. | 0.0762 m | Metric stainless hex bolts (coarse thread) w/ nuts, flat washers and lock washers 6mm - 12mm | $220.21 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | Metric | Stainless steel | 0.4572 m |
| US, Large metal trays, Stainless steel 18-8, Nuts, flat washers, and lock washers #4 - 1/4" - Bolt Depot | Nut and Washer Assortments | 7513 | Assortments | 0.3048 m | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.0762 m | Nuts, flat washers, and lock washers #4 - 1/4" | $103.49 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Stainless steel | 0.4572 m |
| US, Large metal trays, Stainless steel 18-8, Carriage Bolts w/ nuts 1/4" - 3/8" - Bolt Depot | Bolt Assortments | 7501 | Assortments | 0.3048 m | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.0762 m | Carriage Bolts w/ nuts 1/4" - 3/8" | $150.06 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Stainless steel | 0.4572 m |
| US, Large metal trays, Stainless steel 18-8, Nylon insert lock nuts (coarse thread) #4 - 1/2" - Bolt Depot | Nut and Washer Assortments | 7515 | Assortments | 0.3048 m | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.0762 m | Nylon insert lock nuts (coarse thread) #4 - 1/2" | $90.84 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Stainless steel | 0.4572 m |
| US, Large metal trays, Stainless steel 18-8, Wing nuts (coarse thread) #6 - 1/2" - Bolt Depot | Nut and Washer Assortments | 7516 | Assortments | 0.3048 m | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.0762 m | Wing nuts (coarse thread) #6 - 1/2" | $110.39 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Stainless steel | 0.4572 m |
| US, Large metal trays, Stainless steel 18-8, Nuts (coarse thread), flat washers, and lock washers 1/4" - 1/2" - Bolt Depot | Nut and Washer Assortments | 7514 | Assortments | 0.3048 m | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.0762 m | Nuts (coarse thread), flat washers, and lock washers 1/4" - 1/2" | $123.04 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Stainless steel | 0.4572 m |
| Product | Assortment category | Bolt Depot product# | Category | Depth | Height | Name | Plating | Price | Subcategory | Units | material | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| US, Large metal trays, Zinc plated steel, Carriage Bolts w/ nuts 1/4" - 3/8" - Bolt Depot | Bolt Assortments | 7503 | Assortments | 0.3048 m | 0.0762 m | Carriage Bolts w/ nuts 1/4" - 3/8" | Zinc Zinc plated for moderate corrosion resistance. | $103.49 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A low carbon steel for general use. | 0.4572 m |
| US, Large metal trays, Zinc plated steel, Hex nuts (coarse and fine thread) 1/4" - 3/4" - Bolt Depot | Nut and Washer Assortments | 7517 | Assortments | 0.3048 m | 0.0762 m | Hex nuts (coarse and fine thread) 1/4" - 3/4" | Zinc Zinc plated for moderate corrosion resistance. | $90.84 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A low carbon steel for general use. | 0.4572 m |
| US, Large metal trays, Zinc plated steel, Hex nuts, flat washers (USS), and lock washers 1/4" - 1/2" - Bolt Depot | Nut and Washer Assortments | 7518 | Assortments | 0.3048 m | 0.0762 m | Hex nuts, flat washers (USS), and lock washers 1/4" - 1/2" | Zinc Zinc plated for moderate corrosion resistance. | $100.04 | Large metal trays Assortments in professional quality cold rolled steel assortment trays. Coated with a rust and acid resistant baked grey enamel. Rounded plastic inserts make retrieving small parts easy. Each tray's overall dimensions are 18"(w) x 12"(d) x 3"(h). | US | Steel A low carbon steel for general use. | 0.4572 m |
| Product | Between wings | Bolt Depot product# | Category | Price | Subcategory | Thread density | Thread direction | Units | Wing spread | diameter | material | thread count | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Washered wing nuts, Die cast zinc alloy, #8-32 - Bolt Depot | 0.00635 m | 2.661E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | $0.55 | Washered wing nuts A nut that is installed by hand with a built in washer. | Coarse | Right hand | US | 0.02222 m | 0.01588 m | Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. | 32 | 0.005258 m |
| Washered wing nuts, Die cast zinc alloy, 5/16"-18 - Bolt Depot | 0.007925 m | 2.662E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | $0.61 | Washered wing nuts A nut that is installed by hand with a built in washer. | Coarse | Right hand | US | 0.0254 m | 0.01905 m | Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. | 18 | 0.005944 m |
| Washered wing nuts, Die cast zinc alloy, 1/4"-20 - Bolt Depot | 0.007925 m | 2.661E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | $0.6 | Washered wing nuts A nut that is installed by hand with a built in washer. | Coarse | Right hand | US | 0.0254 m | 0.00635 m | Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. | 20 | 0.005944 m |
| Washered wing nuts, Die cast zinc alloy, #10-32 - Bolt Depot | 0.00635 m | 2.661E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | $0.57 | Washered wing nuts A nut that is installed by hand with a built in washer. | Fine | Right hand | US | 0.02222 m | 0.01588 m | Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. | 32 | 0.005258 m |
| Washered wing nuts, Die cast zinc alloy, 3/8"-16 - Bolt Depot | 0.009525 m | 2.662E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | $0.78 | Washered wing nuts A nut that is installed by hand with a built in washer. | Coarse | Right hand | US | 0.02857 m | 0.02222 m | Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. | 16 | 0.006604 m |
| Washered wing nuts, Die cast zinc alloy, #10-24 - Bolt Depot | 0.00635 m | 2.661E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | $0.55 | Washered wing nuts A nut that is installed by hand with a built in washer. | Coarse | Right hand | US | 0.02222 m | 0.01588 m | Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. | 24 | 0.005258 m |
| Product | Body | Bolt Depot product# | Category | Color | Drill bit size | Flange | Head height | Hole size | Maximum grip | Minimum grip | Plating | Price | Subcategory | Thread density | Thread direction | Units | diameter | length | material | thread count |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, #8-32, 0.080" - 0.130" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.417E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | H | Large Large flange for increased strength. | 0.000762 m | 0.006756 m | 0.003302 m | 0.002032 m | Zinc Zinc plated for moderate corrosion resistance. | $0.27 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009906 m | 0.01194 m | Steel A low carbon steel for general use. | 32 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 3/8"-16, 0.150" - 0.312" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.01349 m | Large Large flange for increased strength. | 0.000889 m | 0.01349 m | 0.007925 m | 0.00381 m | Zinc Zinc plated for moderate corrosion resistance. | $0.89 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009525 m | 0.02045 m | Steel A low carbon steel for general use. | 16 |
| Rivet nuts, Small flanged knurled, Zinc plated steel yellow, 3/8"-16, 0.027" - 0.150" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.42E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.01349 m | Small Small flange for near flush installation. | 0.0005588 m | 0.01349 m | 0.00381 m | 0.0006858 m | Zinc Zinc plated for moderate corrosion resistance. | $0.63 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009525 m | 0.01753 m | Steel A low carbon steel for general use. | 16 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 1/4"-20, 0.165" - 0.260" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.009922 m | Large Large flange for increased strength. | 0.000762 m | 0.009931 m | 0.006604 m | 0.004191 m | Zinc Zinc plated for moderate corrosion resistance. | $0.52 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.0127 m | 0.01727 m | Steel A low carbon steel for general use. | 20 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, #8-32, 0.020" - 0.080" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.417E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | H | Large Large flange for increased strength. | 0.000762 m | 0.006756 m | 0.002032 m | 0.000508 m | Zinc Zinc plated for moderate corrosion resistance. | $0.25 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009906 m | 0.01067 m | Steel A low carbon steel for general use. | 32 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 1/2"-13, 0.063" - 0.200" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.01746 m | Large Large flange for increased strength. | 0.001194 m | 0.01745 m | 0.00508 m | 0.0016 m | Zinc Zinc plated for moderate corrosion resistance. | $1.13 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.0174 m | 0.02921 m | Steel A low carbon steel for general use. | 13 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, #10-32, 0.020" - 0.130" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.417E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.007541 m | Large Large flange for increased strength. | 0.000762 m | 0.007544 m | 0.003302 m | 0.000508 m | Zinc Zinc plated for moderate corrosion resistance. | $0.28 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Fine | Right hand | US | #10 | 0.01206 m | Steel A low carbon steel for general use. | 32 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 1/4"-20, 0.027" - 0.165" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.009922 m | Large Large flange for increased strength. | 0.000762 m | 0.009931 m | 0.004191 m | 0.0006858 m | Zinc Zinc plated for moderate corrosion resistance. | $0.5 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.0127 m | 0.01473 m | Steel A low carbon steel for general use. | 20 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, #6-32, 0.020" - 0.080" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.417E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | H | Large Large flange for increased strength. | 0.000762 m | 0.006756 m | 0.002032 m | 0.000508 m | Zinc Zinc plated for moderate corrosion resistance. | $0.22 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009906 m | 0.01067 m | Steel A low carbon steel for general use. | 32 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, #10-32, 0.130" - 0.225" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.417E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.007541 m | Large Large flange for increased strength. | 0.000762 m | 0.007544 m | 0.005715 m | 0.003302 m | Zinc Zinc plated for moderate corrosion resistance. | $0.32 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Fine | Right hand | US | #10 | 0.01486 m | Steel A low carbon steel for general use. | 32 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 5/16"-18, 0.150" - 0.312" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.01349 m | Large Large flange for increased strength. | 0.000889 m | 0.01349 m | 0.007925 m | 0.00381 m | Zinc Zinc plated for moderate corrosion resistance. | $0.81 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.0174 m | 0.02045 m | Steel A low carbon steel for general use. | 18 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 1/2"-13, 0.200" - 0.350" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.01746 m | Large Large flange for increased strength. | 0.001194 m | 0.01745 m | 0.00889 m | 0.00508 m | Zinc Zinc plated for moderate corrosion resistance. | $1.24 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.0174 m | 0.03302 m | Steel A low carbon steel for general use. | 13 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, 5/16"-18, 0.027" - 0.150" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.418E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | 0.01349 m | Large Large flange for increased strength. | 0.000889 m | 0.01349 m | 0.00381 m | 0.0006858 m | Zinc Zinc plated for moderate corrosion resistance. | $0.63 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.0174 m | 0.01753 m | Steel A low carbon steel for general use. | 18 |
| Rivet nuts, Large flanged knurled, Zinc plated steel yellow, #6-32, 0.080" - 0.130" - Bolt Depot | Knurled Knurled body prevents spin-out during installation in soft material. | 2.417E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | Yellow | H | Large Large flange for increased strength. | 0.000762 m | 0.006756 m | 0.003302 m | 0.002032 m | Zinc Zinc plated for moderate corrosion resistance. | $0.25 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009906 m | 0.01194 m | Steel A low carbon steel for general use. | 32 |
| Product | Body | Bolt Depot product# | Category | Drill bit size | Flange | Head height | Hole size | Maximum grip | Minimum grip | Plating | Price | Subcategory | Thread density | Thread direction | Units | diameter | length | material | thread count |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Rivet nuts, Small flanged hex, Zinc plated steel, 1/4"-20, 0.039" - 0.138" - Bolt Depot | Hex Hex body for heavy duty applications when a hexagonal hole is available. | 2.773E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | T | Small Small flange for near flush installation. | 0.0004064 m | 0.009017 m | 0.003505 m | 0.0009906 m | Zinc Zinc plated for moderate corrosion resistance. | $0.39 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009906 m | 0.01709 m | Steel A low carbon steel for general use. | 20 |
| Rivet nuts, Large flanged hex, Zinc plated steel, 3/8"-16, 0.177" - 0.295" - Bolt Depot | Hex Hex body for heavy duty applications when a hexagonal hole is available. | 2.773E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | 0.0131 m | Large Large flange for increased strength. | 0.002007 m | 0.013 m | 0.007493 m | 0.004496 m | Zinc Zinc plated for moderate corrosion resistance. | $1.05 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009525 m | 0.0175 m | Steel A low carbon steel for general use. | 16 |
| Rivet nuts, Large flanged hex, Zinc plated steel, 5/16"-18, 0.031" - 0.157" - Bolt Depot | Hex Hex body for heavy duty applications when a hexagonal hole is available. | 2.773E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | 0.01111 m | Large Large flange for increased strength. | 0.001499 m | 0.011 m | 0.003988 m | 0.0007874 m | Zinc Zinc plated for moderate corrosion resistance. | $0.56 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.016 m | 0.01359 m | Steel A low carbon steel for general use. | 18 |
| Rivet nuts, Large flanged hex, Zinc plated steel, 5/16"-18, 0.157" - 0.276" - Bolt Depot | Hex Hex body for heavy duty applications when a hexagonal hole is available. | 2.773E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | 0.01111 m | Large Large flange for increased strength. | 0.001499 m | 0.011 m | 0.00701 m | 0.003988 m | Zinc Zinc plated for moderate corrosion resistance. | $0.64 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.016 m | 0.01359 m | Steel A low carbon steel for general use. | 18 |
| Rivet nuts, Small flanged hex, Zinc plated steel, 3/8"-16, 0.039" - 0.177" - Bolt Depot | Hex Hex body for heavy duty applications when a hexagonal hole is available. | 2.774E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | 0.0131 m | Small Small flange for near flush installation. | 0.000635 m | 0.013 m | 0.004496 m | 0.0009906 m | Zinc Zinc plated for moderate corrosion resistance. | $0.8 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009525 m | 0.02426 m | Steel A low carbon steel for general use. | 16 |
| Rivet nuts, Large flanged hex, Zinc plated steel, 3/8"-16, 0.039" - 0.177" - Bolt Depot | Hex Hex body for heavy duty applications when a hexagonal hole is available. | 2.773E+04 | Threaded inserts & Rivet nuts For adding a machine thread to material that otherwise cannot be tapped. | 0.0131 m | Large Large flange for increased strength. | 0.002007 m | 0.013 m | 0.004496 m | 0.0009906 m | Zinc Zinc plated for moderate corrosion resistance. | $0.84 | Rivet nuts For adding a load-bearing machine thread to thin sheet material applications. | Coarse | Right hand | US | 0.009525 m | 0.0175 m | Steel A low carbon steel for general use. | 16 |
| Product | Bolt Depot product# | Bolt thread count | Category | Comes with nuts | Comes with washers | Drive type | Head style | Hole size | Minimum embedment | Plating | Price | Subcategory | Units | diameter | length | material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/4" x 5/8" - Bolt Depot | 1.06E+04 | 24 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.00635 m | 0.0127 m | Zinc Zinc plated for moderate corrosion resistance. | $0.42 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.00635 m | 0.01588 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/8" x 2-1/4" - Bolt Depot | 1.061E+04 | 18 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.009525 m | 0.03175 m | Zinc Zinc plated for moderate corrosion resistance. | $0.77 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.007938 m | 0.05715 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/4" x 1-3/8" - Bolt Depot | 1.061E+04 | 24 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.00635 m | 0.0254 m | Zinc Zinc plated for moderate corrosion resistance. | $0.52 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.00635 m | 0.03492 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/8" x 6" - Bolt Depot | 1.062E+04 | 13 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01588 m | 0.0889 m | Zinc Zinc plated for moderate corrosion resistance. | $4.33 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01588 m | 0.1524 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/2" x 2-1/4" - Bolt Depot | 1.062E+04 | 16 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.0127 m | 0.0381 m | Zinc Zinc plated for moderate corrosion resistance. | $1.49 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.0127 m | 0.05715 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/4" x 6-1/4" - Bolt Depot | 1.062E+04 | 11 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01905 m | 0.0889 m | Zinc Zinc plated for moderate corrosion resistance. | $4.6 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01905 m | 0.1588 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/2" x 3" - Bolt Depot | 1.062E+04 | 16 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.0127 m | 0.0381 m | Zinc Zinc plated for moderate corrosion resistance. | $1.55 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.0127 m | 0.0762 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/4" x 3" - Bolt Depot | 1.061E+04 | 24 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.00635 m | 0.0254 m | Zinc Zinc plated for moderate corrosion resistance. | $0.7 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.00635 m | 0.0762 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/2" x 4" - Bolt Depot | 1.062E+04 | 16 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.0127 m | 0.0381 m | Zinc Zinc plated for moderate corrosion resistance. | $1.66 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.0127 m | 0.1016 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/8" x 4" - Bolt Depot | 1.061E+04 | 18 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.009525 m | 0.03175 m | Zinc Zinc plated for moderate corrosion resistance. | $1.14 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.007938 m | 0.1016 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/4" x 2-1/4" - Bolt Depot | 1.061E+04 | 24 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.00635 m | 0.0254 m | Zinc Zinc plated for moderate corrosion resistance. | $0.57 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.00635 m | 0.05715 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/8" x 1-7/8" - Bolt Depot | 1.061E+04 | 18 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.009525 m | 0.03175 m | Zinc Zinc plated for moderate corrosion resistance. | $0.63 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.007938 m | 0.04763 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 1/2" x 6" - Bolt Depot | 1.062E+04 | 16 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.0127 m | 0.0381 m | Zinc Zinc plated for moderate corrosion resistance. | $2.48 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.0127 m | 0.1524 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/8" x 3" - Bolt Depot | 1.061E+04 | 18 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.009525 m | 0.03175 m | Zinc Zinc plated for moderate corrosion resistance. | $0.9 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.007938 m | 0.0762 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/8" x 4-1/4" - Bolt Depot | 1.062E+04 | 13 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01588 m | 0.0889 m | Zinc Zinc plated for moderate corrosion resistance. | $2.98 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01588 m | 0.1079 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 1-1/2" - Bolt Depot | 1.061E+04 | 20 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.007938 m | 0.0254 m | Zinc Zinc plated for moderate corrosion resistance. | $0.48 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.007938 m | 0.0381 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/8" x 2-1/4" - Bolt Depot | 1.062E+04 | 13 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01588 m | 0.0508 m | Zinc Zinc plated for moderate corrosion resistance. | $2.32 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01588 m | 0.05715 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/8" x 3" - Bolt Depot | 1.062E+04 | 13 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01588 m | 0.0508 m | Zinc Zinc plated for moderate corrosion resistance. | $2.59 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01588 m | 0.0762 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/4" x 4-1/4" - Bolt Depot | 1.062E+04 | 11 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01905 m | 0.0889 m | Zinc Zinc plated for moderate corrosion resistance. | $3.72 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01905 m | 0.1079 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2-1/2" - Bolt Depot | 1.061E+04 | 20 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.007938 m | 0.0254 m | Zinc Zinc plated for moderate corrosion resistance. | $0.58 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.007938 m | 0.0635 m | Steel A low carbon steel for general use. |
| Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 3/4" x 2-1/2" - Bolt Depot | 1.062E+04 | 11 | Anchoring products Fasteners for anchoring in stone, concrete, brick and drywall, etc. | Yes | Yes | External hex A hexagonal head for use with a wrench. | Hex Hex heads are six sided for use with a wrench. | 0.01905 m | 0.0508 m | Zinc Zinc plated for moderate corrosion resistance. | $3.31 | Sleeve anchors A heavy duty anchor for use in brick, stone, concrete, or block. Does not require a solid base material for installation. | US | 0.01905 m | 0.0635 m | Steel A low carbon steel for general use. |
| Product | Bolt Depot product# | Brand name | Category | Domestically produced | Grade | Height | Price | Subcategory | Thread density | Thread depth | Thread direction | Units | diameter | material | thread count |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extra tall cap nuts round, Stainless steel 18-8, 3/8"-16, 1" - Bolt Depot | 2.168E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.03334 m | $15.17 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.0254 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts flat, Stainless steel 18-8, 3/8"-16, 1-1/4" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.03969 m | $16.46 | Extra tall cap nuts flat A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.03175 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts round, Stainless steel 18-8, 1/2"-13, 1-1/2" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.0508 m | $22.88 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.0381 m | Right hand | US | 0.0127 m | Stainless steel | 13 |
| Extra tall cap nuts flat, Stainless steel 18-8, 3/8"-16, 1" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.03334 m | $15.2 | Extra tall cap nuts flat A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.0254 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts flat, Stainless steel 18-8, 3/8"-16, 15/32" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.001984 m | $11.26 | Extra tall cap nuts flat A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.01191 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts round, Stainless steel 18-8, 3/8"-16, 15/32" - Bolt Depot | 2.168E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.001984 m | $10.91 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.01191 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts round, Stainless steel 18-8, 3/8"-16, 1-1/4" - Bolt Depot | 2.168E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.03969 m | $16.58 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.03175 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts round, Stainless steel 18-8, 1/2"-13, 1" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.03651 m | $20.65 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.0254 m | Right hand | US | 0.0127 m | Stainless steel | 13 |
| Extra tall cap nuts flat, Stainless steel 18-8, 3/8"-16, 3/4" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.02699 m | $13.18 | Extra tall cap nuts flat A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.01905 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts round, Stainless steel 18-8, 3/8"-16, 3/4" - Bolt Depot | 2.168E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.02699 m | $13.17 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.01905 m | Right hand | US | 0.009525 m | Stainless steel | 16 |
| Extra tall cap nuts round, Stainless steel 18-8, 1/2"-13, 5/8" - Bolt Depot | 2.168E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.02778 m | $17.3 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.01588 m | Right hand | US | 0.0127 m | Stainless steel | 13 |
| Extra tall cap nuts round, Stainless steel 18-8, 1/2"-13, 1-1/4" - Bolt Depot | 2.169E+04 | AMPG | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yes | 18-8 A corrosion resistant steel alloy. The most common stainless steel for general hardware use. | 0.04445 m | $20.93 | Extra tall cap nuts round A nut with a finished top that covers the end of the bolt. These nuts are fully threaded and accept more thread than standard cap nuts. | Coarse | 0.03175 m | Right hand | US | 0.0127 m | Stainless steel | 13 |
| Product | Bolt Depot product# | Category | Color | Flange thickness | Grade | Height | Hex Height | Plating | Price | Subcategory | Thread density | Thread direction | Units | diameter | dimension | material | thread count | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flange nuts, Zinc plated grade 8 steel yellow, 5/16"-18 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.268" - 0.283" | Minimum 0.17" | Zinc Zinc plated for moderate corrosion resistance. | $0.81 | Flange nuts A nut with a built in washer. | Coarse | Right hand | US | 0.007938 m | ASME B18.2.2 | Steel A tempered medium carbon steel. | 18 | 1/2" (Min 0.489", Max 0.500") |
| Flange nuts, nylon insert, Zinc plated grade 8 steel yellow, 1/4"-20 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.265" - 0.300" | Minimum 0.14" | Zinc Zinc plated for moderate corrosion resistance. | $0.23 | Flange nuts, nylon insert A nut with a built in washer and a nylon insert to prevent loosening. | Coarse | Right hand | US | 0.00635 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 20 | 7/16" (Min 0.428", Max 0.438") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 1/2"-13 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.08" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.528" - 0.555" | Minimum 0.26" | Zinc Zinc plated for moderate corrosion resistance. | $0.66 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | 0.0127 m | ASME B18.16.6 | Steel | 13 | 3/4" (Min 0.736", Max 0.752") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 1/2"-20 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.08" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.528" - 0.555" | Minimum 0.26" | Zinc Zinc plated for moderate corrosion resistance. | - | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Fine | Right hand | US | 0.0127 m | ASME B18.16.6 | Steel | 20 | 3/4" (Min 0.736" , Max 0.752" ) |
| Flange nuts, nylon insert, Zinc plated grade 8 steel yellow, 1/2"-13 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.08" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.528" - 0.555" | Minimum 0.26" | Zinc Zinc plated for moderate corrosion resistance. | $1.28 | Flange nuts, nylon insert A nut with a built in washer and a nylon insert to prevent loosening. | Coarse | Right hand | US | 1.00" - 1.070" | ASME B18.16.6 | Steel A tempered medium carbon steel. | 13 | 3/4" (Min 0.736", Max 0.752") |
| Flange nuts, Zinc plated grade 8 steel yellow, 3/4"-10 - Bolt Depot | 2.79E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.06" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.627" - 0.675" | Minimum 0.46" | Zinc Zinc plated for moderate corrosion resistance. | $4.09 | Flange nuts A nut with a built in washer. | Coarse | Right hand | US | 0.01905 m | ASME B18.2.2 | Steel A tempered medium carbon steel. | 10 | 1-1/8" (Min 1.088", Max 1.125") |
| Flange nuts, Zinc plated grade 8 steel yellow, 1/2"-13 - Bolt Depot | 2.79E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.05" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.437" - 0.458" | Minimum 0.31" | Zinc Zinc plated for moderate corrosion resistance. | $0.97 | Flange nuts A nut with a built in washer. | Coarse | Right hand | US | 1.00" - 1.031" | ASME B18.2.2 | Steel A tempered medium carbon steel. | 13 | 3/4" (Min 0.736", Max 0.750") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 3/4"-10 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.11" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.742" - 0.825" | Minimum 0.38" | Zinc Zinc plated for moderate corrosion resistance. | $2.05 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | 0.01905 m | ASME B18.16.6 | Steel | 10 | 1-1/8" (Min 1.088", Max 1.127") |
| Flange nuts serrated, Zinc plated grade 8 steel yellow, 3/8"-16 - Bolt Depot | 1.764E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.330" - 0.347" | Minimum 0.23" | Zinc Zinc plated for moderate corrosion resistance. | $0.22 | Flange nuts serrated A nut with a built in washer which is serrated to resist loosening. | Coarse | Right hand | US | 0.728" - 0.750" | ASME B18.2.2 | Steel A tempered medium carbon steel. | 16 | 9/16" (Min 0.551", Max 0.562") |
| Flange nuts, Zinc plated grade 8 steel yellow, 1/4"-20 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.222" - 0.236" | Minimum 0.14" | Zinc Zinc plated for moderate corrosion resistance. | $0.72 | Flange nuts A nut with a built in washer. | Coarse | Right hand | US | 0.574" - 0.594" | ASME B18.2.2 | Steel A tempered medium carbon steel. | 20 | 7/16" (Min 0.428", Max 0.438") |
| Flange nuts serrated, Zinc plated grade 8 steel yellow, 3/4"-10 - Bolt Depot | 1.764E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.06" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.627" - 0.675" | Minimum 0.46" | Zinc Zinc plated for moderate corrosion resistance. | $1.43 | Flange nuts serrated A nut with a built in washer which is serrated to resist loosening. | Coarse | Right hand | US | 0.01905 m | ASME B18.2.2 | Steel A tempered medium carbon steel. | 10 | 1-1/8" (Min 1.088", Max 1.125") |
| Flange nuts serrated, Zinc plated grade 8 steel yellow, 5/16"-18 - Bolt Depot | 1.764E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.268" - 0.283" | Minimum 0.17" | Zinc Zinc plated for moderate corrosion resistance. | $0.16 | Flange nuts serrated A nut with a built in washer which is serrated to resist loosening. | Coarse | Right hand | US | 0.007938 m | ASME B18.2.2 | Steel A tempered medium carbon steel. | 18 | 1/2" (Min 0.489", Max 0.500") |
| Flange nuts, nylon insert, Zinc plated grade 8 steel yellow, 5/8"-11 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.10" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.646" - 0.690" | Minimum 0.32" | Zinc Zinc plated for moderate corrosion resistance. | $3.24 | Flange nuts, nylon insert A nut with a built in washer and a nylon insert to prevent loosening. | Coarse | Right hand | US | 0.01588 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 11 | 15/16" (Min 0.922", Max 0.939") |
| Flange nuts, Zinc plated grade 8 steel yellow, 3/8"-16 - Bolt Depot | 2.79E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.330" - 0.347" | Minimum 0.23" | Zinc Zinc plated for moderate corrosion resistance. | $0.93 | Flange nuts A nut with a built in washer. | Coarse | Right hand | US | 0.728" - 0.750" | ASME B18.2.2 | Steel A tempered medium carbon steel. | 16 | 9/16" (Min 0.551", Max 0.562") |
| Flange nuts serrated, Zinc plated grade 8 steel yellow, 5/8"-11 - Bolt Depot | 1.764E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.05" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.545" - 0.569" | Minimum 0.40" | Zinc Zinc plated for moderate corrosion resistance. | $0.93 | Flange nuts serrated A nut with a built in washer which is serrated to resist loosening. | Coarse | Right hand | US | 1.248" - 1.281" | ASME B18.2.2 | Steel A tempered medium carbon steel. | 11 | 15/16" (Min 0.861", Max 0.875") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 5/8"-11 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.10" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.646" - 0.690" | Minimum 0.32" | Zinc Zinc plated for moderate corrosion resistance. | $1.84 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | 0.01588 m | ASME B18.16.6 | Steel | 11 | 15/16" (Min 0.922", Max 0.939") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 5/16"-18 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.05" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.320" - 0.365" | Minimum 0.17" | Zinc Zinc plated for moderate corrosion resistance. | $0.29 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | Maximum 0.680" | ASME B18.16.6 | Steel | 18 | 1/2" (Min 0.489", Max 0.502") |
| Flange nuts, nylon insert, Zinc plated grade 8 steel yellow, 3/4"-10 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.11" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.742" - 0.825" | Minimum 0.38" | Zinc Zinc plated for moderate corrosion resistance. | $7.8 | Flange nuts, nylon insert A nut with a built in washer and a nylon insert to prevent loosening. | Coarse | Right hand | US | 1.460" - 1.585" | ASME B18.16.6 | Steel A tempered medium carbon steel. | 10 | 1-1/8" (Min 1.088", Max 1.127") |
| Flange nuts, nylon insert, Zinc plated grade 8 steel yellow, 3/8"-16 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.06" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.404" - 0.425" | Minimum 0.20" | Zinc Zinc plated for moderate corrosion resistance. | $0.71 | Flange nuts, nylon insert A nut with a built in washer and a nylon insert to prevent loosening. | Coarse | Right hand | US | 0.009525 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 16 | 9/16" (Min 0.551", Max 0.564") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 3/8"-16 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.06" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.404" - 0.425" | Minimum 0.20" | Zinc Zinc plated for moderate corrosion resistance. | $0.36 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | Maximum 0.810" | ASME B18.16.6 | Steel | 16 | 9/16" (Min 0.551", Max 0.564") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 7/16"-14 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.07" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.457" - 0.495" | Minimum 0.23" | Zinc Zinc plated for moderate corrosion resistance. | $0.6 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | 0.01111 m | ASME B18.16.6 | Steel | 14 | 11/16" (Min 0.675", Max 0.689") |
| Flange nuts serrated, Zinc plated grade 8 steel yellow, 1/4"-20 - Bolt Depot | 1.763E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.222" - 0.236" | Minimum 0.14" | Zinc Zinc plated for moderate corrosion resistance. | $0.13 | Flange nuts serrated A nut with a built in washer which is serrated to resist loosening. | Coarse | Right hand | US | 0.00635 m | ASME B18.2.2 | Steel A tempered medium carbon steel. | 20 | 7/16" (Min 0.428", Max 0.438") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 5/8"-18 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.10" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.646" - 0.690" | Minimum 0.32" | Zinc Zinc plated for moderate corrosion resistance. | $1.89 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Fine | Right hand | US | 0.01588 m | ASME B18.16.6 | Steel | 18 | 15/16" (Min 0.922", Max 0.939") |
| Flange nuts, nylon insert, Zinc plated grade 8 steel yellow, 5/16"-18 - Bolt Depot | 2.789E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.05" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.320" - 0.365" | Minimum 0.17" | Zinc Zinc plated for moderate corrosion resistance. | $0.37 | Flange nuts, nylon insert A nut with a built in washer and a nylon insert to prevent loosening. | Coarse | Right hand | US | 0.007938 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 18 | 1/2" (Min 0.489", Max 0.502") |
| Flange nuts, Zinc plated grade 8 steel yellow, 5/8"-11 - Bolt Depot | 2.79E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.05" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.545" - 0.569" | Minimum 0.40" | Zinc Zinc plated for moderate corrosion resistance. | $2.56 | Flange nuts A nut with a built in washer. | Coarse | Right hand | US | 0.01588 m | ASME B18.2.2 | Steel A tempered medium carbon steel. | 11 | 15/16" (Min 0.861", Max 0.875") |
| Flange nuts, prevailing torque, Zinc plated grade 8 (grade G) steel yellow, 1/4"-20 - Bolt Depot | 1.766E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.04" | Grade G Grade G nuts are used with Grade 8 fasteners. | 0.265" - 0.300" | Minimum 0.14" | Zinc Zinc plated for moderate corrosion resistance. | $0.21 | Flange nuts, prevailing torque An all metal lock nut with a built in washer often used in high temperature applications. This style of lock nut deforms the threads of the mated fastener. Can be domed or flat style. | Coarse | Right hand | US | 0.00635 m | ASME B18.16.6 | Steel | 20 | 7/16" (Min 0.428", Max 0.438") |
| Flange nuts serrated, Zinc plated grade 8 steel yellow, 1/2"-13 - Bolt Depot | 1.764E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Minimum 0.05" | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.437" - 0.458" | Minimum 0.31" | Zinc Zinc plated for moderate corrosion resistance. | $0.6 | Flange nuts serrated A nut with a built in washer which is serrated to resist loosening. | Coarse | Right hand | US | 1.00" - 1.031" | ASME B18.2.2 | Steel A tempered medium carbon steel. | 13 | 3/4" (Min 0.736", Max 0.750") |
| Product | Bolt Depot product# | Category | Color | Grade | Height | Hex Height | Plating | Price | Subcategory | Thread density | Thread direction | Units | diameter | dimension | material | thread count | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 5/16"-18 - Bolt Depot | 2676 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.329" - 0.359" | Minimum 0.250" | Zinc Zinc plated for moderate corrosion resistance. | $0.2 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.007938 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 18 | 1/2" (Min 0.489", Max 0.502") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 3/8"-16 - Bolt Depot | 2677 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.438" - 0.468" | Minimum 0.335" | Zinc Zinc plated for moderate corrosion resistance. | $0.26 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.009525 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 16 | 9/16" (Min 0.551", Max 0.564") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1"-8 - Bolt Depot | 2684 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 1.016" - 1.078" | Minimum 0.825" | Zinc Zinc plated for moderate corrosion resistance. | $2.89 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.0254 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 8 | 1-1/2" (Min 1.427", Max 1.440") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 9/16"-12 - Bolt Depot | 2680 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.626" - 0.656" | Minimum 0.469" | Zinc Zinc plated for moderate corrosion resistance. | $0.88 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.01429 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 12 | 7/8" (Min 0.861", Max 0.877") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 7/16"-20 - Bolt Depot | 7183 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.438" - 0.468" | Minimum 0.324" | Zinc Zinc plated for moderate corrosion resistance. | $0.4 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.01111 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 20 | 5/8" (Min 0.616", Max 0.627") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1/4"-20 - Bolt Depot | 2675 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.298" - 0.328" | Minimum 0.225" | Zinc Zinc plated for moderate corrosion resistance. | $0.15 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.00635 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 20 | 7/16" (Min 0.430", Max 0.439") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 3/4"-10 - Bolt Depot | 2682 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.860" - 0.890" | Minimum 0.742" | Zinc Zinc plated for moderate corrosion resistance. | $1.07 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.01905 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 10 | 1-1/8" (Min 1.052", Max 1.064") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1/4"-28 - Bolt Depot | 7180 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.298" - 0.328" | Minimum 0.225" | Zinc Zinc plated for moderate corrosion resistance. | $0.16 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.00635 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 28 | 7/16" (Min 0.430", Max 0.439") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1/2"-13 - Bolt Depot | 2679 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.579" - 0.609" | Minimum 0.464" | Zinc Zinc plated for moderate corrosion resistance. | $0.43 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.0127 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 13 | 3/4" (Min 0.736", Max 0.752") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 5/16"-24 - Bolt Depot | 7181 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.329" - 0.359" | Minimum 0.250" | Zinc Zinc plated for moderate corrosion resistance. | $0.2 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.007938 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 24 | 1/2" (Min 0.489", Max 0.502") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 9/16"-18 - Bolt Depot | 7185 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.626" - 0.656" | Minimum 0.469" | Zinc Zinc plated for moderate corrosion resistance. | $0.93 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.01429 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 18 | 7/8" (Min 0.861", Max 0.877") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 7/16"-14 - Bolt Depot | 2678 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.438" - 0.468" | Minimum 0.324" | Zinc Zinc plated for moderate corrosion resistance. | $0.33 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.01111 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 14 | 5/8" (Min 0.616", Max 0.627") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 3/8"-24 - Bolt Depot | 7182 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.438" - 0.468" | Minimum 0.335" | Zinc Zinc plated for moderate corrosion resistance. | $0.29 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.009525 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 24 | 9/16" (Min 0.551", Max 0.564") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1"-14 - Bolt Depot | 7189 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 1.016" - 1.078" | Minimum 0.825" | Zinc Zinc plated for moderate corrosion resistance. | $3.64 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.0254 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 14 | 1-7/16" (Min 1.427", Max 1.440") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 7/8"-9 - Bolt Depot | 2683 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.969" - 0.999" | Minimum 0.790" | Zinc Zinc plated for moderate corrosion resistance. | $1.98 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.02222 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 9 | 1-5/16" (Min 1.239", Max 1.252") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 5/8"-11 - Bolt Depot | 2681 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.735" - 0.765" | Minimum 0.593" | Zinc Zinc plated for moderate corrosion resistance. | $0.85 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.01588 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 11 | 15/16" (Min 0.922", Max 0.940") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1-1/4"-7 - Bolt Depot | 2.491E+04 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 1.360" - 1.422" | Minimum 1.125 | Zinc Zinc plated for moderate corrosion resistance. | $11.09 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Coarse | Right hand | US | 0.03175 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 7 | 1-7/8" (Min 1.812", Max 1.875") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 3/4"-16 - Bolt Depot | 7187 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.860" - 0.890" | Minimum 0.742" | Zinc Zinc plated for moderate corrosion resistance. | $1.37 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.01905 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 16 | 1-1/16" (Min 1.052", Max 1.064") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 7/8"-14 - Bolt Depot | 7188 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.969" - 0.999" | Minimum 0.790" | Zinc Zinc plated for moderate corrosion resistance. | $2.72 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.02222 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 14 | 1-1/4" (Min 1.239", Max 1.252") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 1/2"-20 - Bolt Depot | 7184 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.579" - 0.609" | Minimum 0.464" | Zinc Zinc plated for moderate corrosion resistance. | $0.49 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.0127 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 20 | 3/4" (Min 0.736", Max 0.752") |
| Hex nylon insert lock nuts, Zinc plated grade 8 steel yellow, 5/8"-18 - Bolt Depot | 7186 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 0.735" - 0.765" | Minimum 0.593" | Zinc Zinc plated for moderate corrosion resistance. | $1.03 | Hex nylon insert lock nuts A hex nut with a nylon ring to resist loosening. | Fine | Right hand | US | 0.01588 m | ASME B18.16.6 | Steel A tempered medium carbon steel. | 18 | 15/16" (Min 0.922", Max 0.940") |
| Product | Bolt Depot product# | Category | Color | Grade | Height | Plating | Price | Subcategory | Thread density | Thread direction | Units | diameter | dimension | material | thread count | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hex nuts, Zinc plated grade 8 steel yellow, 7/8"-9 - Bolt Depot | 2590 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 3/4" (Min 0.724", Max 0.776") | Zinc Zinc plated for moderate corrosion resistance. | $1.61 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.02222 m | ASME B18.2.2 | SAE J995 | 9 | 1-5/16" (Min 1.269", Max 1.312") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1/2"-13 - Bolt Depot | 2586 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 7/16" (Min 0.427", Max 0.448") | Zinc Zinc plated for moderate corrosion resistance. | $0.2 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.0127 m | ASME B18.2.2 | SAE J995 | 13 | 3/4" (Min 0.736", Max 0.750") |
| Hex nuts, Zinc plated grade 8 steel yellow, 5/8"-18 - Bolt Depot | 2602 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 35/64" (Min 0.535", Max 0.559") | Zinc Zinc plated for moderate corrosion resistance. | $0.54 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.01588 m | ASME B18.2.2 | SAE J995 | 18 | 15/16" (Min 0.922", Max 0.938") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1/4"-28 - Bolt Depot | 2592 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 7/32" (Min 0.212", Max 0.226") | Zinc Zinc plated for moderate corrosion resistance. | $0.08 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.00635 m | ASME B18.2.2 | SAE J995 | 28 | 7/16" (Min 0.428", Max 0.438") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1-1/2"-6 - Bolt Depot | 7192 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 1-5/16" (Min 1.245", Max 1.317") | Zinc Zinc plated for moderate corrosion resistance. | $6.47 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.0381 m | ASME B18.2.2 | SAE J995 | 6 | 2-1/4" (Min 2.175", Max 2.250") |
| Hex nuts, Zinc plated grade 8 steel yellow, 9/16"-12 - Bolt Depot | 2587 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 31/64" (Min 0.473", Max 0.496") | Zinc Zinc plated for moderate corrosion resistance. | $0.34 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.01429 m | ASME B18.2.2 | SAE J995 | 12 | 7/8" (Min 0.861", Max 0.875") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1/2"-20 - Bolt Depot | 2600 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 7/16" (Min 0.427", Max 0.448") | Zinc Zinc plated for moderate corrosion resistance. | $0.25 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.0127 m | ASME B18.2.2 | SAE J995 | 20 | 3/4" (Min 0.736", Max 0.750") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1"-14 - Bolt Depot | 2605 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 55/64" (Min 0.831", Max 0.887") | Zinc Zinc plated for moderate corrosion resistance. | $3.04 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.0254 m | ASME B18.2.2 | SAE J995 | 14 | 1-1/2" (Min 1.450", Max 1.500") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1-1/8"-7 - Bolt Depot | 7190 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 63/64" (Min 0.939", Max 0.999") | Zinc Zinc plated for moderate corrosion resistance. | $3.72 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.02857 m | ASME B18.2.2 | SAE J995 | 7 | 1-11/16" (Min 1.631", Max 1.688") |
| Hex nuts, Zinc plated grade 8 steel yellow, 7/8"-14 - Bolt Depot | 2604 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 3/4" (Min 0.724", Max 0.776") | Zinc Zinc plated for moderate corrosion resistance. | $2.05 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.02222 m | ASME B18.2.2 | SAE J995 | 14 | 1-5/16" (Min 1.269", Max 1.312") |
| Hex nuts, Zinc plated grade 8 steel yellow, 3/4"-10 - Bolt Depot | 2589 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 41/64" (Min 0.617", Max 0.665") | Zinc Zinc plated for moderate corrosion resistance. | $0.54 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.01905 m | ASME B18.2.2 | SAE J995 | 10 | 1-1/8" (Min 1.088", Max 1.125") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1"-8 - Bolt Depot | 2591 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 55/64" (Min 0.831", Max 0.887") | Zinc Zinc plated for moderate corrosion resistance. | $2.42 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.0254 m | ASME B18.2.2 | SAE J995 | 8 | 1-1/2" (Min 1.450", Max 1.500") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1/4"-20 - Bolt Depot | 2582 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 7/32" (Min 0.212", Max 0.226") | Zinc Zinc plated for moderate corrosion resistance. | $0.07 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.00635 m | ASME B18.2.2 | SAE J995 | 20 | 7/16" (Min 0.428", Max 0.438") |
| Hex nuts, Zinc plated grade 8 steel yellow, 5/8"-11 - Bolt Depot | 2588 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 35/64" (Min 0.535", Max 0.559") | Zinc Zinc plated for moderate corrosion resistance. | $0.36 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.01588 m | ASME B18.2.2 | SAE J995 | 11 | 15/16" (Min 0.922", Max 0.938") |
| Hex nuts, Zinc plated grade 8 steel yellow, 7/16"-14 - Bolt Depot | 2585 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 3/8" (Min 0.365", Max 0.385") | Zinc Zinc plated for moderate corrosion resistance. | $0.15 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.01111 m | ASME B18.2.2 | SAE J995 | 14 | 11/16" (Min 0.675", Max 0.688") |
| Hex nuts, Zinc plated grade 8 steel yellow, 3/8"-16 - Bolt Depot | 2584 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 21/64" (Min 0.320", Max 0.337") | Zinc Zinc plated for moderate corrosion resistance. | $0.11 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.009525 m | ASME B18.2.2 | SAE J995 | 16 | 9/16" (Min 0.551", Max 0.563") |
| Hex nuts, Zinc plated grade 8 steel yellow, 3/8"-24 - Bolt Depot | 2594 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 21/64" (Min 0.320", Max 0.337") | Zinc Zinc plated for moderate corrosion resistance. | $0.16 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.009525 m | ASME B18.2.2 | SAE J995 | 24 | 9/16" (Min 0.551", Max 0.563") |
| Hex nuts, Zinc plated grade 8 steel yellow, 1-1/4"-7 - Bolt Depot | 7191 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 1-1/16" (Min 1.030", Max 1.094") | Zinc Zinc plated for moderate corrosion resistance. | $4.95 | Hex nuts A standard six sided nut. | Coarse | Right hand | US | 0.03175 m | ASME B18.2.2 | SAE J995 | 7 | 1-7/8" (Min 1.812", Max 1.875") |
| Hex nuts, Zinc plated grade 8 steel yellow, 9/16"-18 - Bolt Depot | 2601 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 31/64" (Min 0.473", Max 0.496") | Zinc Zinc plated for moderate corrosion resistance. | $0.57 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.01429 m | ASME B18.2.2 | SAE J995 | 18 | 7/8" (Min 0.861", Max 0.875") |
| Hex nuts, Zinc plated grade 8 steel yellow, 3/4"-16 - Bolt Depot | 2603 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 41/64" (Min 0.617", Max 0.665") | Zinc Zinc plated for moderate corrosion resistance. | $0.66 | Hex nuts A standard six sided nut. | Fine | Right hand | US | 0.01905 m | ASME B18.2.2 | SAE J995 | 16 | 1-1/8" (Min 1.088", Max 1.125") |
| Hex nuts, Zinc plated grade 8 steel yellow, 5/16"-18 - Bolt Depot | 2583 | Nuts Nuts have internal machine threads, for use with machine thread bolts and screws. | Yellow | Grade 8 Grade 8 is stronger than grade 5, and is commonly found in high strength automotive applications. | 17/64" (Min 0.258", Max 0.273") |