| Product | Bolt Depot product# | Category | Domestically produced | Finish | Jaw opening width | Material | Price | Rated Capacity | Subcategory | Take-up | Thread count | Units | diameter | length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Turnbuckles, Forged jaw & eye, Steel plain finish, Domestically produced, 3/8" x 6" - Bolt Depot | 2.641E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | 0.0127 m | Steel A low carbon steel for general use. | $33.7 | 471.7 kg | Forged jaw & eye Jaw end fittings consist of a jaw, clevis pin, and cotter pin to attach to connecting components that cannot be opened and eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 16 | US | 0.007938 m | 0.3016 m |
| Turnbuckles, Forged jaw & eye, Steel plain finish, Domestically produced, 1/2" x 6" - Bolt Depot | 2.641E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | 0.01588 m | Steel A low carbon steel for general use. | - | 816.5 kg | Forged jaw & eye Jaw end fittings consist of a jaw, clevis pin, and cotter pin to attach to connecting components that cannot be opened and eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 13 | US | 0.04921 m | 0.3238 m |
| Product | Bolt Depot product# | Category | Domestically produced | Finish | Material | Price | Rated Capacity | Subcategory | Take-up | Thread count | Units | diameter | length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Turnbuckles, Forged eye & eye, Steel plain finish, Domestically produced, 3/8" x 6" - Bolt Depot | 2.639E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | Steel A low carbon steel for general use. | $25.34 | 471.7 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 16 | US | 0.03889 m | 0.2889 m |
| Turnbuckles, Forged eye & eye, Steel plain finish, Domestically produced, 5/8" x 6" - Bolt Depot | 2.639E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | Steel A low carbon steel for general use. | $40.44 | 1225 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 11 | US | 0.03254 m | 0.3493 m |
| Turnbuckles, Forged eye & eye, Steel plain finish, Domestically produced, 1/2" x 6" - Bolt Depot | 2.639E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | Steel A low carbon steel for general use. | $31.63 | 816.5 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 13 | US | 0.04921 m | 0.3334 m |
| Turnbuckles, Forged eye & eye, Steel plain finish, Domestically produced, 3/4" x 6" - Bolt Depot | 2.639E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | Steel A low carbon steel for general use. | $58.22 | 1814 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 10 | US | 0.07144 m | 0.3873 m |
| Turnbuckles, Forged eye & eye, Steel plain finish, Domestically produced, 1" x 6" - Bolt Depot | 2.64E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Plain Unplated finish. | Steel A low carbon steel for general use. | $134.86 | 3856 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 8 | US | 0.0508 m | 0.4826 m |
| Product | Bolt Depot product# | Category | Domestically produced | Jaw opening width | Material | Plating | Price | Rated Capacity | Subcategory | Take-up | Thread count | Units | diameter | length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Turnbuckles, Forged jaw & eye, Hot dipped galvanized steel, Domestically produced, 1/2" x 6" - Bolt Depot | 2.641E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | 0.01588 m | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | - | 816.5 kg | Forged jaw & eye Jaw end fittings consist of a jaw, clevis pin, and cotter pin to attach to connecting components that cannot be opened and eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 13 | US | 0.04921 m | 0.3238 m |
| Turnbuckles, Forged jaw & eye, Hot dipped galvanized steel, Domestically produced, 3/8" x 6" - Bolt Depot | 2.641E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | 0.0127 m | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | - | 471.7 kg | Forged jaw & eye Jaw end fittings consist of a jaw, clevis pin, and cotter pin to attach to connecting components that cannot be opened and eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 16 | US | 0.007938 m | 0.3016 m |
| Product | Bolt Depot product# | Category | Domestically produced | Material | Plating | Price | Rated Capacity | Subcategory | Take-up | Thread count | Units | diameter | length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Turnbuckles, Forged eye & eye, Hot dipped galvanized steel, Domestically produced, 1/2" x 6" - Bolt Depot | 2.64E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | $34.42 | 816.5 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 13 | US | 0.04921 m | 0.3334 m |
| Turnbuckles, Forged eye & eye, Hot dipped galvanized steel, Domestically produced, 5/8" x 6" - Bolt Depot | 2.64E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | $44.36 | 1225 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 11 | US | 0.03254 m | 0.3493 m |
| Turnbuckles, Forged eye & eye, Hot dipped galvanized steel, Domestically produced, 3/8" x 6" - Bolt Depot | 2.64E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | $30.21 | 471.7 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 16 | US | 0.03889 m | 0.2889 m |
| Turnbuckles, Forged eye & eye, Hot dipped galvanized steel, Domestically produced, 1" x 6" - Bolt Depot | 2.641E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | $146.21 | 3856 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 8 | US | 0.0508 m | 0.4826 m |
| Turnbuckles, Forged eye & eye, Hot dipped galvanized steel, Domestically produced, 3/4" x 6" - Bolt Depot | 2.641E+04 | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. | Yes | Steel A low carbon steel for general use. | Hot dipped galvanized Hot dipped galvanized is a coating for very good corrosion resistance. | $72.6 | 1814 kg | Forged eye & eye Eye end fittings are used with connecting components that can be opened and attached to the eye. | 0.1524 m | 10 | US | 0.07144 m | 0.3873 m |
| Product | Brand | Country of Origin | Eye Inner Diameter | Eye Outer Diameter | Hand | Manufacturers Part Number | Price | Rated Capacity | Type | diameter | length |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ken Forging TBE-01-LH - Turnbuckle Eye - 1/4 - 20 x 4" - Carbon - Left Hand - Made In USA | Ken Forging | Made in USA | 0.5 | 1 | Left | TBE-01-LH | $7 | 226.8 kg | Carbon | 1/4 - 20 | 0.1016 m |
| Ken Forging TBE-05-LH-HDG - Turnbuckle Eye - 1/2 - 13 x 4-5/8" - Galvanized - Made In USA | Ken Forging | Made in USA | 1 | 1.938 | Left | TBE-05-LH-HDG | $7.9 | 816.5 kg | Galvanized | 1/2 - 13 | 0.1175 m |
| Ken Forging TBE-03-RH - Turnbuckle Eye - 3/8 - 16 x 4-1/8" - Carbon - Right Hand - Made In USA | Ken Forging | Made in USA | 0.7969 | 1.531 | Right | TBE-03-RH | $6.6 | 471.7 kg | Carbon | 3/8 - 16 | 0.1048 m |
| Ken Forging TBE-03-LH-HDG - Turnbuckle Eye - 3/8 - 16 x 4-1/8" - Galvanized - Made In USA | Ken Forging | Made in USA | 0.7969 | 1.531 | Left | TBE-03-LH-HDG | $6.8 | 471.7 kg | Galvanized | 3/8 - 16 | 0.1048 m |
| Ken Forging TBE-03-RH-HDG - Turnbuckle Eye - 3/8 - 16 x 4-1/8" - Galvanized - Made In USA | Ken Forging | Made in USA | 0.7969 | 1.531 | Right | TBE-03-RH-HDG | $6.2 | 471.7 kg | Galvanized | 3/8 - 16 | 0.1048 m |
| Ken Forging TBE-05-RH-HDG - Turnbuckle Eye - 1/2 - 13 x 4-5/8" - Galvanized - Made In USA | Ken Forging | Made in USA | 1 | 1.938 | Right | TBE-05-RH-HDG | $8.3 | 816.5 kg | Galvanized | 1/2 - 13 | 0.1175 m |
| Ken Forging TBE-07-LH-HDG - Turnbuckle Eye - 5/8 - 11 x 4-9/16" - Galvanized - Made In USA | Ken Forging | Made in USA | 1.297 | 2.281 | Left | TBE-07-LH-HDG | $12.75 | 1225 kg | Galvanized | 5/8 - 11 | 0.1159 m |
| Ken Forging TBE-08-RH-HDG - Turnbuckle Eye - 3/4 - 10 x 4-7/8" - Galvanized - Made In USA | Ken Forging | Made in USA | 1.531 | 2.812 | Right | TBE-08-RH-HDG | $18.5 | 1814 kg | Galvanized | 3/4 - 10 | 0.1238 m |
| Ken Forging TBE-05-LH - Turnbuckle Eye - 1/2 - 13 x 4-5/8" - Carbon - Left Hand - Made In USA | Ken Forging | Made in USA | 1 | 1.938 | Left | TBE-05-LH | $7.5 | 816.5 kg | Carbon | 1/2 - 13 | 0.1175 m |
| Ken Forging TBE-01-RH - Turnbuckle Eye - 1/4 - 20 x 4" - Carbon - Right Hand - Made In USA | Ken Forging | Made in USA | 0.5 | 1 | Right | TBE-01-RH | $7 | 226.8 kg | Carbon | 1/4 - 20 | 0.1016 m |
| Ken Forging TBE-10-LH-HDG - Turnbuckle Eye - 1 - 8 x 5-3/4" - Galvanized - Left Hand - Made In USA | Ken Forging | Made in USA | 2 | 3.875 | Left | TBE-10-LH-HDG | $36.95 | 3856 kg | Galvanized | 1 - 8 | 0.146 m |
| Product | Brand | Country of Origin | Manufacturers Part Number | Price | Rated Capacity | Take Up | Type | diameter | length |
|---|---|---|---|---|---|---|---|---|---|
| Ken Forging TB103-J-E-HDG - Turnbuckle Assembly - Jaw & Eye - 3/8-16 x 11-7/8" - Made In USA | Ken Forging | Made in USA | TB103-J-E-HDG | $25.95 | 471.7 kg | 0.1524 m | Galvanized | 3/8 - 16 | 0.3016 m |
| Ken Forging TB108-E-E - Turnbuckle Assembly - Eye & Eye - 3/4-10 x 15-1/4" - Carbon - Made In USA | Ken Forging | Made in USA | TB108-E-E | $40.95 | 1814 kg | 0.1524 m | Carbon | 3/4 - 10 | 0.3873 m |
| Ken Forging TB107-E-E - Turnbuckle Assembly - Eye & Eye - 5/8-11 x 13-3/4" - Carbon - Made In USA | Ken Forging | Made in USA | TB107-E-E | $28.95 | 1225 kg | 0.1524 m | Carbon | 5/8 - 11 | 0.3493 m |
| Ken Forging TB105-E-E-HDG - Turnbuckle Assembly - Eye & Eye - 1/2-13 x 13-1/8" - Made In USA | Ken Forging | Made in USA | TB105-E-E-HDG | $23.75 | 816.5 kg | 0.1524 m | Galvanized | 1/2 - 13 | 0.3334 m |
| Ken Forging TB103-J-E - Turnbuckle Assembly - Jaw & Eye - 3/8-16 x 11-7/8" - Carbon - Made In USA | Ken Forging | Made in USA | TB103-J-E | $23 | 471.7 kg | 0.1524 m | Carbon | 3/8 - 16 | 0.3016 m |
| Ken Forging TB105-E-E - Turnbuckle Assembly - Eye & Eye - 1/2-13 x 13-1/8" - Carbon - Made In USA | Ken Forging | Made in USA | TB105-E-E | $21.75 | 816.5 kg | 0.1524 m | Carbon | 1/2 - 13 | 0.3334 m |